FS: Embedded 3.5" Pentium-M/Celeron-M Dothan board combo - TINY!!

Status
Not open for further replies.
W

widefault

Supreme [H]ardness
Joined
Dec 18, 2000
Messages
5,137
FS: Embedded 3.5" Pentium-M/Celeron-M Dothan board combo - TINY!!

Bought for a project, but decided to go a different way. Advantech PCM-9381 3.5" Biscuit Embedded board, Celeron-M 1.3GHz, 512MB DDR333. Board is the size of a 3.5" hard drive. i855GME chipset. Everything you need onboard, audio, video, IDE, compact flash, ethernet, etc. Even has support for DVI, but needs a special cable. Will support any 400MHz fsb Pentium-M or Celeron-M. Check the links below for more info and pictures. Celeron-M is a Dothan core, 1MB, 1.3GHz, xD-NX bit. DDR is Apida, DDR400 but runs at DDR333 due to the chipset. Comes with all cables including audio and ATX adapter, CD of drivers and manual, and startup sheet. Tiny and very low power, under 30 watts. Great starting point for a CarPC or other small and portable system.
Product Link: http://www.advantech.com/products/Model_Detail.asp?model_id=1-23A1CS&BU=&PD=EC
Pics:
http://www.widefault.com/forsale/adv1.jpg
http://www.widefault.com/forsale/adv2.jpg
http://www.widefault.com/forsale/adv3.jpg
http://www.widefault.com/forsale/adv4.jpg
http://www.widefault.com/forsale/adv5.jpg

$250 shipped

Prefer US only
Prefer PayPal
Feel free to ask questions, I'll do my best to answer
Heatware: http://www.heatware.com/eval.php?id=2914
Ebay under widefault
e-mail is [email protected]
 
Try this again. Might be interested in a trade for a 20" Dell widescreen of any type.
 
Could also use...
- 250GB+ SATA drives. Specs not important, but warranty is
- 1GB DDR333, CL2.5 or better. Pick board, needs to be real DDR333 CL2.5(or CL2) or have an SPD with the right settings for DDR333. Corsair seems to work okay. No need for overclockability
 
Status
Not open for further replies.
Back
Top