FS: E6600, 2x1GB 6400 4-4-4-12, Zalman and Dangerden Block, 1kw Antec PSU

Status
Not open for further replies.
N

Nagstaku

Limp Gawd
Joined
Jan 5, 2005
Messages
169
Hi!

heat nagstaku
ebay evanm05

120$ -Shipped- "Antec TPQ-1000" 1000 watt power supply very light load, just a q6600 w/ 88gt for 2 yrs. only OC'd like 10% of the time

p3020131.jpg


70$ -Shipped- SOLD!!! 64$ to Gingerbean Core 2 Duo E6600 775 SL9S8 (less than 1000 hrs use) (add 8$ to include the Intel HSF from my Q6600)

45$ -Shipped- SOLD!!! 42$ to Cecil G.Skill 2x1GB DDR2 800 f2-6400phu2-2gbhz Micron D9's 4-4-4-12


I decided to downgrade my whole setup, I'm getting into bicycling now. Also let me know if you want any fans, cables, 12" CCFL's, tubing, etc for a buck extra, I'll see what I have.

::cheers::
 
Last edited:
If you're getting into cycling, I'd consider checking out bikesdirect.com

(not to spam or anything, but they have absurdly good prices, assuming you're not looking to go full brand name carbon fiber everything)
 
Yea, I've built a bike for someone else off bikesdirect.com

They have really good deals. Luckily, i live in the most bike friendly town in USA, portland oregon. I was able to pick up shimano 105 and dura ace parts during the winter and built an alu/carb frame up for only 400$ about.

Right now I've just stripped all the parts and paint off an 80's rampar that I'm converting to a fixie that will be almond colored with burgundy red lugs.

next i think I'm going to try my hand at brazing together a steel frame for touring that uses custom carved lugs. Looks like materials to braze a frame is about 300$ for the tubes and 140$ for a set of lugs, plus the acetylene torch is cheap. Just have to make sure I do it right so my bike doesn't break down mid tour!

I'll post some pictures of my project if your interested
 
Status
Not open for further replies.
Back
Top