FS: 9700K copper IHS, 850W Corsair

Discussion in 'For Sale / Trade' started by Cecil, Jan 17, 2019.

  1. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,680
    Joined:
    Jun 17, 2009
    9700K delidded with copper IHS and liquid metal.
    $250 shipped if no fee payment

    I lost a lot of hours over the holidays and going out of state for a funeral. Was going to be done doing processors but got a few that I can make around $20-25 on. I really can't go any lower on the pricing. I don't have my test bench setup anymore but have my itx htpc to at least test them with an air cooler at stock to make sure the temps dropped and it's seated correctly.

    If anyone wants to send me their processor, I can delid and put a copper IHS with liquid metal on and ship back for around $60.




    Corsair TX850M 850w Gold PSU - Has most the cables, missing a sata cable. This one specifically.
    https://www.amazon.com/CORSAIR-TX850M-Certified-Modular-Supply/dp/B01N5WW9GQ
    $85 shipped





    simgur.com/gallery/ba57Nj7

    Pics of the delids and relids of a Rockitcool copper IHS. Quicksilver was used for removal of the factory STIM solder, not sandpaper or razor. Super clean and used Thermal Grizzly Conductonaut liquid metal and a very thin layer of Permatex automotive gasket maker to attach the new copper IHS (the camera made the layer look thicker than it actually is).

    Used a Gigabyte Aorus Elite Z390 motherboard for testing. With a 280mm AIO and 1.35v limit to test for 4.9-5Ghz AVX with OCCT Linpack to make sure temps are in the 70s-80s.

    Please understand this board has an excellent VRM setup, and other boards with different VRMs and LLC controls may need different voltages, and may not be stable at what I get stable. If you have a Gigabyte Aorus Z390 you should expect similar results with similar settings.


    Listings are for the CPU only no cooler or box with the copper IHS already attached and ready to go.



    Heatware under Cecil
     

    Attached Files:

    Last edited: Jan 14, 2020 at 11:33 AM
    Auer, next-Jin, flotz and 6 others like this.
  2. dgingeri

    dgingeri 2[H]4U

    Messages:
    2,830
    Joined:
    Dec 5, 2004
    Doesn't Conductonaut do bad things to bare copper over time?
     
  3. hazmatic

    hazmatic [H]ard|Gawd

    Messages:
    1,295
    Joined:
    Dec 9, 2004
    It will stain copper, but it won't impact performance. Aluminum however...
     
  4. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,680
    Joined:
    Jun 17, 2009
    It's fully safe for copper.

    Added one of the 9900ks
     
  5. Solhokuten

    Solhokuten [H]ard|Gawd

    Messages:
    1,265
    Joined:
    Dec 9, 2009
    I wish you were selling this back when I bought my 9900k. I definitely would have bit.
     
    DrezKill and {NG}Fidel like this.
  6. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,680
    Joined:
    Jun 17, 2009
  7. geforce man

    geforce man [H]ard|Gawd

    Messages:
    1,111
    Joined:
    Jan 18, 2006
    I want so freaking bad, but just can't justify at the moment. the 6700k is still rockin :p
     
  8. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,680
    Joined:
    Jun 17, 2009
    Dropped prices a bit
     
  9. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,680
    Joined:
    Jun 17, 2009
    Adding second 9900k shortly. With 1.35v 5.2 didn't work, but 5.1Ghz seems ok so far.
     
  10. H2R2P2

    H2R2P2 Limp Gawd

    Messages:
    407
    Joined:
    Jun 18, 2006
    The Rockitcool copper IHS's I have seen are supposedly not compatible with the 9900K because the die is slightly thicker and as a result will put too much stress on the 9900K die vs the others of the same gen. Did you modify the Rockitcool? Or did they release a model to account for the die variance?
     
  11. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,680
    Joined:
    Jun 17, 2009
    They released a new model for the 9 series. That is what I used.
    There is roughly half a mill or less of space from the PCB and the edge of the IHS to allow the rtv gasket to not raise the IHS off of the die when a thin layer is used.
     
    Manny Calavera and FrgMstr like this.
  12. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,680
    Joined:
    Jun 17, 2009
    Would really like to have a couple of these sold by Thursday so I can avoid a fee on something I have to pay. Make me a reasonable offer.
     
  13. legcramp

    legcramp [H]ardForum Junkie

    Messages:
    10,857
    Joined:
    Aug 16, 2004
    Bump, nice chips that are actually stable with proof, jealous!
     
  14. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,680
    Joined:
    Jun 17, 2009
  15. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,680
    Joined:
    Jun 17, 2009
    Prices dropped some more
     
  16. capnstabn

    capnstabn Limp Gawd

    Messages:
    443
    Joined:
    Jan 6, 2006
    Shocked these haven't sold yet.
     
  17. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,680
    Joined:
    Jun 17, 2009
  18. WozniakMac

    WozniakMac [H]ard|Gawd

    Messages:
    1,459
    Joined:
    Sep 3, 2005
  19. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,680
    Joined:
    Jun 17, 2009
  20. mls1995

    mls1995 2[H]4U

    Messages:
    3,389
    Joined:
    Jan 20, 2007
    can't believe this 9900k is still here. wow.
     
  21. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,680
    Joined:
    Jun 17, 2009
  22. extide

    extide 2[H]4U

    Messages:
    3,449
    Joined:
    Dec 19, 2008
    Great prices on this stuff... watching...
     
  23. wadec22

    wadec22 2[H]4U

    Messages:
    3,835
    Joined:
    Jul 26, 2005
    same. I have zero need for one but keep trying to find a reason. :)
     
  24. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,680
    Joined:
    Jun 17, 2009
    Feel free to make offers :)

    Probably adding a couple more CPUs over the next couple weeks.
     
  25. chuckd007

    chuckd007 [H]ard|Gawd

    Messages:
    1,142
    Joined:
    Dec 8, 2007
  26. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,680
    Joined:
    Jun 17, 2009
  27. horrorshow

    horrorshow [H]ardness Supreme

    Messages:
    7,476
    Joined:
    Dec 14, 2007
    Bump for a choice 9900k!
     
  28. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,680
    Joined:
    Jun 17, 2009
  29. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,680
    Joined:
    Jun 17, 2009
  30. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,680
    Joined:
    Jun 17, 2009
  31. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,680
    Joined:
    Jun 17, 2009
  32. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,680
    Joined:
    Jun 17, 2009
    i9 sold, added i5
     
  33. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,680
    Joined:
    Jun 17, 2009
  34. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,680
    Joined:
    Jun 17, 2009
  35. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,680
    Joined:
    Jun 17, 2009
  36. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,680
    Joined:
    Jun 17, 2009
  37. ShuttleLuv

    ShuttleLuv [H]ardness Supreme

    Messages:
    7,073
    Joined:
    Apr 12, 2003
  38. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,680
    Joined:
    Jun 17, 2009
    Sold the i5. Got another i9 to add in the next couple days when its done.
     
  39. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,680
    Joined:
    Jun 17, 2009
  40. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,680
    Joined:
    Jun 17, 2009
    Updated, 5.2Ghz i9 to be added in a couple days.
     
    DTN107 likes this.