I am trying to teach a neighbor how to build his own PC, he is a great kid and bought all the parts on his own by working at a grocery store.
These are the specs:
AthlonXP Barton 2500 CPU w/Alpha HSF ============ not overclocked
Chaintech 7NJS Zenith Motherboard
Unknown (no label) 512MB DDR RAM
ATI 9600XT A-I-W ========= not overclocked
NEC ND1100A DVD+RW
AOpen 1648/BKH DVD-ROM
Seagate ST3160827AS 160GB SATA ======== partition is 120GB
Kingwin KWI-450WS power supply
WinXP w/ SP1 ============== both from CD
The system will run like a champion - UNTIL - WinXP SP1 is installed and then the system starts to get flakey.
- Files appear to be corrupted - if the system is powered off then back on the file is fine.
- system will hang for 15 seconds
- no matter what settings the BIOS has, the system will get flakey after SP1
Does anyone have any ideas on how I can fix this - I am out of ideas. The only mod I did was cut off the 4-pin +12V and 6-pin AUX Power because they were not needed and was not able to hide them.
I want to try swapping out the power supply but all that I have access to is a Antec PP-303X. I know nothing about rails and power stuff but can it handle everything?
Thanks for any input
These are the specs:
AthlonXP Barton 2500 CPU w/Alpha HSF ============ not overclocked
Chaintech 7NJS Zenith Motherboard
Unknown (no label) 512MB DDR RAM
ATI 9600XT A-I-W ========= not overclocked
NEC ND1100A DVD+RW
AOpen 1648/BKH DVD-ROM
Seagate ST3160827AS 160GB SATA ======== partition is 120GB
Kingwin KWI-450WS power supply
WinXP w/ SP1 ============== both from CD
The system will run like a champion - UNTIL - WinXP SP1 is installed and then the system starts to get flakey.
- Files appear to be corrupted - if the system is powered off then back on the file is fine.
- system will hang for 15 seconds
- no matter what settings the BIOS has, the system will get flakey after SP1
Does anyone have any ideas on how I can fix this - I am out of ideas. The only mod I did was cut off the 4-pin +12V and 6-pin AUX Power because they were not needed and was not able to hide them.
I want to try swapping out the power supply but all that I have access to is a Antec PP-303X. I know nothing about rails and power stuff but can it handle everything?
Thanks for any input