friends comp gets to windows loading screen then reboots?

EquaLiZr

Supreme [H]ardness
2FA
Joined
May 8, 2000
Messages
5,841
Im not too sure what the cause of this is (he said he had some virus's) but when i turn it on it only gets to the windows loading screen then reboots after about a minute. I cant get into safe mode or nothing. Only thing i havnt tried is doing a rebuild but if i do so, it will re-write the newer files (wont it?) Is there anything i can do short of formatting?

could the MBR need fixing?
 
One day, my computer started doing the exact same thing. In the weeks leading up to that I had been getting random reboots.

After a lot of testing and tribulations I discovered that it only happened when I had my seagate SATA hard drive plugged in to the MOBO. Even though it was a data only drive (no OS files, and not in the boot order) whenever I tried to boot with the SATA cable connected it would get stuck in a reboot cycle. I called the seagate technical support and after about 5 more calls and getting past the "if our program does not return any errors we cannot RMA the drive" I was issued a RMA number. Also, as part of getting an RMA, they had me try to load windows XP on it "because you must do that before an RMA can be issued" it would randomly fail at different percentages when trying to copy the installation files down to the hard drive.

Just a personal experience there, hope it helps.
 
I have no idea whats inside of it. components are about 3-4 yrs old. its got a 20gig and a 40gig thats all i know. There is no SATA and its an AGP motherboard.

you know when windows starts to load up and that bar goes across the screen at the bottom? well it just keeps going and going then it gets slower and slower. then it reboots
 
Same thing happens intermittently on my HTPC. It seems the IDE 2 header/controller is a little finicky. I generally fix it by unplugging my DVD burner and starting Windows. Once it starts I shut the PC down, plug back in the DVD buner and reboot. This probably happens once every ten reboots. I'm not saying this is your problem but it well within the realm of possibilities. Basically unplug every IDE device except the OS drive and narrow it down from there. Once you find the culprit try a new IDE cable first.
 
Major_A said:
Same thing happens intermittently on my HTPC. It seems the IDE 2 header/controller is a little finicky. I generally fix it by unplugging my DVD burner and starting Windows. Once it starts I shut the PC down, plug back in the DVD buner and reboot. This probably happens once every ten reboots. I'm not saying this is your problem but it well within the realm of possibilities. Basically unplug every IDE device except the OS drive and narrow it down from there. Once you find the culprit try a new IDE cable first.

My comp will bsod sometimes with IDE2 active. I just went to all SATAs but that probaly not an option for a 3-4 old comp.
 
Back
Top