evenfall928
Limp Gawd
- Joined
- Oct 3, 2006
- Messages
- 271
Ok, so I just got a bunch of new parts in a couple days ago. So now I'm running with...
DFI LanParty SLI-D
Athlon 64 4000+ w/ XP-90 heatsink
OCZ 2 x 1gb pc3200 kit
GeForce 7900gs
Maxtor 200gb PATA
Lite-On 20x DVDRW
Ultra V-series 500w PSU (yeah...not the greatest of psu's I realize, but it came with my case and I don't have the money to afford an upgrade, so...)
Anyhow, I go to set it up and do a fresh install of windows, but during which I keep getting this "please insert Windows SP2 CD" message. The CD was in there, but it refused to recognize it... To make a long story short, I switched IDE cables and it fixed the issue.
I get my compy up and running, do a bit of minor overclocking, run 3dmark 05, etc. Everything seems stable enough, I game for the better part of the night. Then I go to shut it off and it does one of those "install on shut off" Windows updates.
I hook up my computer today, turn it on and after the Windows loading screen, it just goes to a black screen. After a while, the system reboots.
Then I figure it's probably the overclocking for whatever reason, so I go to turn all of that back to default settings, stll doesn't help. Booting into safe mode hangs at loading "giveio.sys". At this point I have no idea what's causing it, though my best guesses were either something's wrong with my hard drive, or during the windows update it corrupted somehow.
I reinstall windows, and again it asks me for the CD and doesn't recognize it. But with the new IDE cable. I don't really remember the details, but basically I switched around the cables for a bit and it ended up installing fine.
Anyhow I go in and try to copy driver files off of my flash drive and onto my hard drive. It gives me a strange "The request could not be performed because of an I/O device error". I try a couple more times, sometimes the copy windows loads, sometimes it just hangs there.
Then I switched the usb port the drive was in and all went well from there.
So yes, long story, but I'm hoping I can get some opinions on what caused the problem in the first place.
Was leaving the flash drive in the usb port somehow causing windows to not boot? Or...it could've been a bad hard drive, bad ide cable, bad ide connector, or maybe a corruption during the windows update? None of the above?
I'm leaning towards the hard drive primarily because I carried it around in my backpack for a weekend trip out of town, so maybe minor shock damage has it acting wonky?
DFI LanParty SLI-D
Athlon 64 4000+ w/ XP-90 heatsink
OCZ 2 x 1gb pc3200 kit
GeForce 7900gs
Maxtor 200gb PATA
Lite-On 20x DVDRW
Ultra V-series 500w PSU (yeah...not the greatest of psu's I realize, but it came with my case and I don't have the money to afford an upgrade, so...)
Anyhow, I go to set it up and do a fresh install of windows, but during which I keep getting this "please insert Windows SP2 CD" message. The CD was in there, but it refused to recognize it... To make a long story short, I switched IDE cables and it fixed the issue.
I get my compy up and running, do a bit of minor overclocking, run 3dmark 05, etc. Everything seems stable enough, I game for the better part of the night. Then I go to shut it off and it does one of those "install on shut off" Windows updates.
I hook up my computer today, turn it on and after the Windows loading screen, it just goes to a black screen. After a while, the system reboots.
Then I figure it's probably the overclocking for whatever reason, so I go to turn all of that back to default settings, stll doesn't help. Booting into safe mode hangs at loading "giveio.sys". At this point I have no idea what's causing it, though my best guesses were either something's wrong with my hard drive, or during the windows update it corrupted somehow.
I reinstall windows, and again it asks me for the CD and doesn't recognize it. But with the new IDE cable. I don't really remember the details, but basically I switched around the cables for a bit and it ended up installing fine.
Anyhow I go in and try to copy driver files off of my flash drive and onto my hard drive. It gives me a strange "The request could not be performed because of an I/O device error". I try a couple more times, sometimes the copy windows loads, sometimes it just hangs there.
Then I switched the usb port the drive was in and all went well from there.
So yes, long story, but I'm hoping I can get some opinions on what caused the problem in the first place.
Was leaving the flash drive in the usb port somehow causing windows to not boot? Or...it could've been a bad hard drive, bad ide cable, bad ide connector, or maybe a corruption during the windows update? None of the above?
I'm leaning towards the hard drive primarily because I carried it around in my backpack for a weekend trip out of town, so maybe minor shock damage has it acting wonky?