Freezer 64 Pro thermal paste question

R

ryansebiz

Limp Gawd
Joined
Aug 5, 2005
Messages
430
Like everyone and their mom I ordered an AMD x2 last week (the 4600). I also bought a Freezer 64 Pro.

My question is, should I use the thermal paste that comes preapplied with the Freezer or remove it and add some Arctic Silver 5?
 
I used AS5, but a few reviews said that the pre-applied works pretty good as well. I think MadShrimps is one of the h/w sites that used it.
 
Mav451 said:
I used AS5, but a few reviews said that the pre-applied works pretty good as well. I think MadShrimps is one of the h/w sites that used it.
Click to expand...

Thanks Mav.

Any other Freezer 64 Pro owners out there?
 
My roomie bought one and installed it with the factory AC paste. After about 2 weeks it slowly dropped about 2 more degrees C. Seemed to work great for him. Course anything was a big improvement over the 3800+X2's stock cooler and thermal pad.
 
I used the stock paste on the 64pro for a couple weeks until I got a new mobo then switched to AS ceramique...didn't notice any difference in temps. I did get a 3c drop by switching to Zalman STG-1 however..
 
I have the Freezer Pro and used AS5....but I've also heard that the paste that comes with it is pretty good...so if you don't have the AS5 already, don't bother.
 
I also used myself the premounted thermal-compound and was right content with it. Changing to AS5 didn't make out any difference at all. I also read that dell/ibm and some other bigname-brands should be using this thermal-compound ... they prolly should know why.

Greets Floke
 
The paste that comes on it is Arctic silver MX-1. Thats the newest expensive stuff. I woulda kept that myself. It does perform 1-2c lower than other pastes.
 
Retsam said:
The paste that comes on it is Arctic silver MX-1. Thats the newest expensive stuff. I woulda kept that myself. It does perform 1-2c lower than other pastes.
Click to expand...


I've used mx-1 on my last couple of builds, works about the same as as5. supposedly you don't have to worry about any arcing or anything with it because it's totally non-conductive to electricity.
 
i used the stuff that came pre-applied for a couple months then i applied some as5 and did not see any difference. the stuff is good.
 
You must log in or register to reply here.
Back
Top