Fractal Design Define Mini / Define R3 Case Resonance?

halcyon

Gawd
Joined
Mar 20, 2003
Messages
717
I am looking at building a 6 drive raid array and putting it into a Define Mini or Define R3.. can anyone that has used these cases speak to any resonance issues they've seen/haven't seen with a similar configuration? I've had 4-5 drives in cheaper aluminum cases that have driven me crazy with resonance and I need to make sure this isn't going to be an issue.

Thanks!
 
At least on the R3, the side panels are steel and quite heavy, they also fit quite well and have damping material. GF's system has a 74GB Raptor, 2 green drives (1.5tb and 2tb) and a 320gb samsung, apart from fan noise (and seeking of the raptor) the system is inaudible.
 
I've got 16 Mechanical drives in my XL (The R3's big brother), and all I can hear are the fans outside the case (and even they are pretty quiet). The Fractals have a sound deadening material that is adhered to the inside of the case side panels which does a great job.
 
We've got a few XLs and R3s with many drives in each and the only one that had resonance had been dropped and damaged during shipping and was never the same, even after replacing the damaged panels and pushing the chassis back into shape. Good cases, imho.
 
We've got a few XLs and R3s with many drives in each and the only one that had resonance had been dropped and damaged during shipping and was never the same, even after replacing the damaged panels and pushing the chassis back into shape. Good cases, imho.

In fact, I cannot say enough good things about the XL's. I replaced 2 boxes that were based on Lian-Li PC-V2000 full towers (at the time we got them, the Lian Li's were the only cases with 12 3.5" bays that were easily accessible). The XL's have 10 3.5" bays out of the box, and we added a lian-li 6-in-3 adapter which allowed an additional 4 3.5" drives and 2 2.5" drives in 3 5.25" units, allowing 14 3.5" drives, 2 2.5" SSDs and a Blu-Ray drive all internal in a case a little bit smaller and a whole lot quieter than the Lian-Li's. In fact, with the sound deadening material, we thought we would see increases in thermals but they actually run 2 degrees cooler across the board.
 
Thing that is killing me about this case is. No hard drive led

Kinda ironic building a server with no Hard drive led. You basically have no idea if hard drive is busy
 
Thing that is killing me about this case is. No hard drive led

Kinda ironic building a server with no Hard drive led. You basically have no idea if hard drive is busy

SSH or telnet into it and monitor it's performance with a number of tools.
You don't need an LED light to see if your drives are busy.
 
Thing that is killing me about this case is. No hard drive led

Kinda ironic building a server with no Hard drive led. You basically have no idea if hard drive is busy

I have enough flashing lights among my various boxes so one less is welcome, not a missing feature. There are a number of utils which will give you an activity notification.
 
I have enough flashing lights among my various boxes so one less is welcome, not a missing feature. There are a number of utils which will give you an activity notification.

+1 I just want a black chassis with few LEDs. Ventalation holes = hello motherboard lights!
 
I'm happy to not have a year-round christmas tree in my living room to be honest. The last two HAF cases I bought I actually had to replace the LEDs or unplug them because it looked like a 747's wing lights were aimed at you when you were in front of it.
 
And some devices don't just use regular leds, they use the brightest leds they can find.
 
I have the define R3 with 9 HDDs in it, pretty damn quiet, all I can hear is fans.
Possibly the best case I have ever used.
 
Back
Top