Fr33Flow 48mm CPU Block + Pump + Res (maybe)

Discussion in 'Small Form Factor Systems' started by wahaha360, Dec 31, 2018.

  1. wahaha360

    wahaha360 Gawd

    Messages:
    940
    Joined:
    Sep 8, 2012
    Update 2019-01-14 : Block Pump Prototype 1

    qjdza5vm.jpg CDCeh9Tm.jpg w0mDuiSm.jpg



    A lot of you guys are familiar with the Swiftech Apogee Drive ii, but it's too tall (~66mm with fittings on one side, ~62mm on the other side) for a lot of the builds.

    yEnAPHNm.jpg HHh5m0Km.jpg

    I have been working with a small shop to get a low profile (~48mm) CPU Block + DDC Pump + Res (maybe) combo that will work for the A4, C4, Ghost S1, M1, Mach One and Skyreach 4 Mini.

    Renderings
    dT14cRm.jpg
    3jdjGOx.png
    WF1opnj.png

    Prototype
     
    Last edited: Jan 14, 2019
    LukeD, smarenwolf, RosaJ and 5 others like this.
  2. wahaha360

    wahaha360 Gawd

    Messages:
    940
    Joined:
    Sep 8, 2012
  3. chemist_slime

    chemist_slime [H]ard|Gawd

    Messages:
    1,098
    Joined:
    Jul 24, 2005
    Do you plan to sell these and if so when, and would you offer a 2011-3 Narrow ILM? I have an Asrock x99e-itx/ac motherboard. I was initially also looking at the Apogee Drive II but it lacked a narrow ILM bracket and I didn't that time to make my own.

    Furthermore, due to space constraints I couldn't afford to give up space for a reservoir. If your solution offered a pump/block + res combo that is space efficient, you'd definitely have a much larger market opportunity IMO. I for sure would be the first to purchase one. Cheers.
     
  4. Flowmotion

    Flowmotion n00b

    Messages:
    43
    Joined:
    Nov 16, 2010
    9900k + 2080 Ti + watercoold + itx mini case = awesome

    I tried to get some swiftech? mini reservoir for 8x8 in europe. There is no way for a micro watercooling system (except aio cooler + pump).
     
  5. LRAStart

    LRAStart n00b

    Messages:
    6
    Joined:
    Feb 16, 2019
    This is a pretty sweet idea. I know they are just renderings, but what would be your plan for that type of lighting? Using translucent plastic with discrete LEDs, or some other method?
     
  6. {NG}Fidel

    {NG}Fidel [H]ardness Supreme

    Messages:
    5,838
    Joined:
    Jan 17, 2005