Fostex Monitors to PC/Mac what setup to use?

cwarehouse

Limp Gawd
Joined
May 16, 2005
Messages
215
I am buying a set of Fostex PM 0.5 monitors for use with my Mac.
It's a G4 MDD I use for audio, writing papers, etc.

Would it be ok to use a 1/8" stereo plug from the Mac to RCA, then RCA to XLR to the speakers?

Should I use a Preamp?
Then go
>1/8" stereo plug from the Mac to RCA
>then RCA to preamp
>Preamp RCA out with adapter to XLR

Any input is appreciated.
 
Sure, you should be able to cable from your Mac in the way you suggest. If the speakers are self-powered, you won't need an amplifier as they will be expecting line-level at their inputs. You could add a small mixer if you wish, essentially to give you convenient control over volume, like this one for about $100:

http://www.mackie.com/products/402vlz3/
 
As the above poster mentioned, you shouldn't have any problem hooking up those Fostex monitors to your MAC PC as you have described.

I have a Windows PC and run straight RCA to XLR cables between the soundcard (Asus Xonar STX) and my monitors (Dynaudio BM6a MkII), but adding 1/8" adapters won't be a problem for you.

For volume control I mostly use my Logitech keyboard that has media and volume control keys.

Tossing a mixer in the loop is certainly an option for you though.
 
Thanks for the responses
I'm going to go with the RCA to XLR for now.

Can't wait to hear these!.
 
Bought XLR to RCA adapters, and then a 1/8" stereo to RCA adapter.

The sound is great. VERY well balanced. ;)
 
Back
Top