Floppy does not work on Epox 8KDA3J...HELP

FlipCody

Limp Gawd
Joined
Feb 28, 2003
Messages
249
My buddy is putting together a machine and the floppy is not working for him. We have tried everything. He was trying to update bios before installing os. I believe that he would need floppy to install winXP pro using the SATA controller as well (he bought a SATA drive).

He has confirmed that he has in fact created a bootable floppy. The power is getting to floppy. He says cables are connected correctly and are in all the way. The floppy controller in enabled in bios.

I have no idea what is wrong.

Help!
 
If the floppy cable has 3 connectors, make sure the drive is connected to the end connector. Not the middle one. He may have simply got a bad floppy drive or more likely a bad floppy disk. tell him to try a couple of different floppies. If that don't work, see if you can borrow a floppy drive from someone, to see if that is the problem. Try a different floppy cable if that don't work. Hope it helps.
 
Thanks for the reply!

He used the end connector. He has tried a different cable. The boot disk works on his notebook. He bought a new floppy drive.

Nothing works.

At this point we are thinking bad mobo or there is some obscure setting in bios that we are not finding.
 
Back
Top