Flashing BIOS causing higher CPU temps...

lexcruiser

Weaksauce
Joined
Jan 4, 2005
Messages
97
I have an Asus P5AD2 Deluxe mofo w/ an Intel P4 3ghz cpu.
Right now, I'm using BIOS version 1001 but trying to flash it with any iteration of the updates (1002-1006) causes idle CPU temps to jump anywhere from 10-15C @ idle. I thought maybe that just happened initially but waiting a few days yielded no changes.

Has this happened to anyone else? I've re-flashed it back to v.1001, emailed ASUS tech support and they've been no help at all.

Thanks in advance!
 
not got a lot of experience with that, but could it be that the bios update just gives a false reading? the bios sensors are not exactly renowned for their accuracy... what temps are you getting?? and what cpu?? also over clocked??
 
Morphius143 said:
not got a lot of experience with that, but could it be that the bios update just gives a false reading? the bios sensors are not exactly renowned for their accuracy... what temps are you getting?? and what cpu?? also over clocked??

CPU is a Prescott 3ghz, not overclocked when I updated the BIOS.
My idle temps are around 37C but after flashing it would jump to about 50C. I don't think its the sensors as the case feels noticably hotter to the touch as well....

Any ideas?
 
i trust you checked that it was running at the same speed in the bios?? that the flash didn't somehow overclock it? also (not used to that processor) it doesnt have any settings that may make it run colder when not under load? take a good look at the old bios settings, noting down anything at all interesting... may show up something
 
The BIOS has the thermal calibration information in it. The upgrade probably calibrated the sensor wrong. Not likely a big deal.
 
mwarps said:
The BIOS has the thermal calibration information in it. The upgrade probably calibrated the sensor wrong. Not likely a big deal.

But the machine actually feels warmer to the touch as well... Any other ideas?
I've never seen this happen before... =T
 
Do you have any meaningful data suggesting the cpu temp is higher? You'll notice something if you want to notice somehthing. Get a laser thermal probe and see what's going on. If it's higher, flash back, if you can.
 
mwarps said:
Do you have any meaningful data suggesting the cpu temp is higher? You'll notice something if you want to notice somehthing. Get a laser thermal probe and see what's going on. If it's higher, flash back, if you can.

Not to sound like a j3rk, but did you read my original post? :p

I'm using Asus probe, CPU-Z, and Everest to get the temperature data on my PC. They're all reading off the same sensors so it probably doesn't matter which one of those programs I'm using. But basically, the idle temps increase about 10-15C (according to the temp readings) upon flashing the BIOS w/ any of the updates currently out for my mobo. There is also a noticeable increase in warmth to the touch, as my actual PC case becomes hotter as well. I've re-flashed back to the original v1001 right now and am looking for any solutions or reasons as to why. I understand that the actual temp readings are possibly inaccurrate, but there is still actual physical evidence of warmer temps w/ the updated BIOS and I do not know why that is happening. I'm stumped like a tree. (Yea, I know, corny.)

So, any suggestions/advice/comments would be appreciated! :)
 
Go check alt.motherboard.asus, or something like that ... news group ... when I had the Asus .. it was normal for them to issue BIOS updates that fix something and break something else ... reason why I don;t buy their mobo unless it's mature ...
 
thebliX said:
since when does cpu-z give cpu temps?

Ahh.. sorry. I've been switching back & forth b/t probe & Cpu-Z to monitor temps and CPU clock speeds w/ OC'ing. Just meant that those have been the 3 programs I've been using to keep track of everything.
:p
 
NEVER use bios or any software to check temps or rails, its so inaccurate its sometimes funny. just get a temp thingy or multimeter.
 
Back
Top