• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Fitting a H70 in a midtower

K

Krieger91

[H]ard|Gawd
Joined
May 6, 2007
Messages
1,879
I have a Lancool Dragon Lord PC-K62 case, it's a mid tower and I am really not sure if the Corsair H70 would be able to fit into there, does anyone have experience with fitting this into a mid tower?
 
Haven't done a build with that case, but looking at the company web site, I can see they have pass throughs for water cooling below the rear 120mm fan. So to answer your question you should be able to, the rad for the H70 must be mounted to the exterior of the rear 120mm fan, on the back of the case, and leave the fan on the inside.

I would just email the company to make sure 100% they will know right off the bat, or just call them.

goodluck
 
CustomModAddict said:
Haven't done a build with that case, but looking at the company web site, I can see they have pass throughs for water cooling below the rear 120mm fan. So to answer your question you should be able to, the rad for the H70 must be mounted to the exterior of the rear 120mm fan, on the back of the case, and leave the fan on the inside.

I would just email the company to make sure 100% they will know right off the bat, or just call them.

goodluck
Click to expand...

Oh yeah, I just saw those when I was looking, I have another question now lol. Is it possible to disconnect the hoses from the H70?
 
Krieger91 said:
Oh yeah, I just saw those when I was looking, I have another question now lol. Is it possible to disconnect the hoses from the H70?
Click to expand...

at that point, you might as well go custom. because most people have a PITA of a time to get the hose back and fully filled with water.
 
Here is a pic of the H50 in mine. I thought the H70 had shorter hoses so it should fit better.
 
The H70 is not that hard to fit. I have put two in Rosewill Blackbones, and two in Antec 300s. It should fit in any standard midtower
 
The H50 and H70 are designed to be easy to install in nearly any case with a rear 120mm fan. You should be ok
 
You must log in or register to reply here.
Back
Top