So i have a custom case i am wanting to install watercooling in. This is my first watercooling endeaver after reading throught several threads. Here is the case and album link:
http://s119.photobucket.com/user/hickfarm/library/John Deere Case
First off I need to take some measurements. But I was wanting to fit 360mm Radiator at the bottom of the case and put the case up on casters. But after looking a 360mm radiator is 15.7" long and going off of the ATX board being 9.6" wide I won't have enough room for it. I am open to mounting the reservoir on the back of the case and the let the radiator hookups extend out the back of the case and hook it up that way and use a PCI passthrough connector for the tubes to enter the PC.
Radiator i am looking at XSPC RX360.
I will be cooling an i7 2600k. I also have a 980TI i am still contemplating on cooling. Don't wanna drop 130$ on a waterblock though.
I am open to a 240mm on the front 2 fans as well if the 360mm rad won't work. I am open to ideas. I just wanna stay away from a reservoir using a 5.25 bay.
Are the reservoir/pump combos a good idea? I feel they would be since it is one less connection to worry about.
http://s119.photobucket.com/user/hickfarm/library/John Deere Case
First off I need to take some measurements. But I was wanting to fit 360mm Radiator at the bottom of the case and put the case up on casters. But after looking a 360mm radiator is 15.7" long and going off of the ATX board being 9.6" wide I won't have enough room for it. I am open to mounting the reservoir on the back of the case and the let the radiator hookups extend out the back of the case and hook it up that way and use a PCI passthrough connector for the tubes to enter the PC.
Radiator i am looking at XSPC RX360.
I will be cooling an i7 2600k. I also have a 980TI i am still contemplating on cooling. Don't wanna drop 130$ on a waterblock though.
I am open to a 240mm on the front 2 fans as well if the 360mm rad won't work. I am open to ideas. I just wanna stay away from a reservoir using a 5.25 bay.
Are the reservoir/pump combos a good idea? I feel they would be since it is one less connection to worry about.
As an Amazon Associate, HardForum may earn from qualifying purchases.