First problems with Velocity Micro build..

Forgive me, but I have been reading this thread with interest, and cannot figure out why VM just did not send this individual a new system, and not having to go through this failed computer for so long to get it finally fixed ? If I were to have this same trouble, I would want VM to send me out another system after a day or two, no longer.

Sorry, but if I paid for a working system, and did not work within a day or so, it goes back. I will reconsider a future purchase at this point...
 
...I don't feel I was entitled to that; not even close. Initially, I had a few random reboots, that seemed to be traced to Everest Ultimate. I couldn't be 100% sure, so Velocity Offered to replace the PSU and to make sure everything was running correctly. Based on the review of the eVGA 680i board here, I made the decision to upgrade to that motherboard and to upgrade to the WD Raptor 150GB drive. I had heard some clicks with one of the original HDs...they ran a diagnostics, it checked out fine, was installed as a third data drive, and is currently operating just fine. The heating issue on return was a heat sink fan unit from Artic Cooling that wasn't seated correctly - something that probably occured during shipping - and couldn't reseat correctly because of a bent tab. They sent out a brand new unit, it took just minutes to install, and my PC is now humming along happily at a cool 32-33C at idle. I feel VERY happy with the service they've offered...I will buy from them again. You cannot put a price on good customer support and service, and I have received nothing but that from everyone I've been in contact with at Velocity Micro.
 
SR45 said:
Forgive me, but I have been reading this thread with interest, and cannot figure out why VM just did not send this individual a new system, and not having to go through this failed computer for so long to get it finally fixed ? If I were to have this same trouble, I would want VM to send me out another system after a day or two, no longer.

Sorry, but if I paid for a working system, and did not work within a day or so, it goes back. I will reconsider a future purchase at this point...

We absolutely do rebuilds when necessary, I have been involved with one or two, we rarely have to do so.

In this case, if I'm not mistaken, it came back because the customer wanted to, as per our lifetime upgrade plan, switch up to a 680i board. Upon return to the customer, it seemed to us that the temperatures were on the high side even there were no stability issues, so we sent on-site service to replace the HS/F. I don't believe that at anytime this system was DOA or a "failed" system.
 
....have to admit, I didn't say it quite as briefly or as eloquently though *grin*.

John
 
I think the two answers provide helpful perspective. Thanks Chris and CJ for posting.

PinataUT
 
I've given my build a pretty good workout so far this weekend...I have had two odd quirks...a "Windows Explorer has experienced an error and must shut down" when closing a session of Madden 2007 (first time for that on this or my previous PC)...and an out of the blue "Windows has recovered from a serious..." on a startup. These were very early Saturday; I decided to give the recovery DVD that Velocity sent a whirl (always like to make sure these things work as advertised when I get one) and rebuilt from scratch (didn't update the Audigy driver this time...Heather let me know that some folks had had some problems with the driver released in October from Creative)...have used it a good bit since the rebuild, with only two errors during the rebuild process (both having to do with files not being read initially while trying to install, driver for the Epson 2200 and the install for Madden 2007...who knows what caused that). This gets me to my question:

eVGA and NVIDIA has released a beta of a new BIOS for the board that I am NOT going to install in the beta stage. Given the history with this board...and the fact that it is a new product with a BIOS sure to mature over time...when the release version of the new BIOS is out, would you recommend it? I am usually of the "if it ain't broke, don't fix it" variety when it comes to a BIOS flash; and this one looks for you to clear the CMOS after the flash; but given the relative "youth" of this product I'm wondering if this wouldn't be a good idea once its out for a few days. IF you concur...short of copying all the settings screen by screen...are there BIOS settings for this board that the folks at VM use after installation that you could share for an easy recovery of those settings after the flash and CMOS clear?

Thanks, Chris..and here's wishing you and the folks at Velocity Micro a great holiday season.

John
 
If you get a few moments and you're around your PC tomorrow, give me a holler. I'd like to remote in and take a look at your event log...see what it is that's making Windows hiccup. Could be most anything, but I want to make sure that it's nothing too odd. Fortunately, Windows errors are not nearly as scary as weird blue screens or spontaneous reboots. :eek: I'll work with you on the BIOS settings, too, when we talk.

(Random thought...Have you patched Madden? Not too sure, it's been a while, but if I remember correctly, there's an auto-patching feature for the game...and if there's not, I am positive that there's a manual way to start the patching process.)
 
....and unfortunately, with my schedule this week I won't really be around my PC until late in the day each day...very late...until Wednesday or so. I can give you a holler then if you'd like. I'm going to drop you a quick e-mail with some thoughts...I couldn't get Madden TO install this time around...but I had been running the updated version. Thanks for checking in.

John
 
and a bad taste left in my mouth by the 680i. For the past two days I've had nothing but problems with my build. Running P23 BIOS since it was released, I started having VERY flaky issues...devices connected to USB ports would disappear on one boot, reappear on a reboot...but not always functioning...hard freezes started happening sporadically and become more and more frequent by the evening of the 27th..all on stock speeds, no overclocking. Did two different clean installs of Windows, and inevitably hit a road bump before I could finish installing apps; finally, about 9 pm last night it froze and, on reboot, would get past the logo screen. Initially couldn't even get into the BIOS. Gave up after two hours, tried again this morning, and it booted into a safe BIOS mode, asking me to reset the CPU and memory timings (I had never adjusted/changed them to begin with). A quick check revealed they had not been changed, saved settings and rebooted again...finally booted into Windows but with a lot of disk access (more than usual) and quickly gave me another hard freeze. A quick call to Velocity Micro, a good conversation...long story short I'm ditching the 680i board and going to the Intel Badaxe2; less bling, no SLI, but, from everything I've read, VERY stable. If it werent' for so many issues reported (even though P23 seems to have solved them for many) I'd have considered another 680i...but too many problems with too many systems have been reported, and while I'm not sure if it's a case of a major design fault or technology that was simply rushed to market too fast, it would seem that something ain't right in NVIDIA land, at least IMHO.

For the better part I'm still solidly sold on Velocity...they promptly answered my called and didn't hesitate regarding replacement of the eVGA board...yet given my problems, I'm beginning to worry about the integrity of the build of my PC and whether or not the problems with the board could have damaged memory DIMMS or other components. The first time I sent this unit back, it was 50% problem related, 50% upgrade; this time, it's 100% problem related and the second time in a month the unit has had to be shipped back. The last time the HSF was a problem upon return - again promptly and swiftly corrected by Velocity - but a concern about the issues shipments back and forth can cause. Some of this is simply frustration on my part at being without a PC for the second time in less than a month; and, due to the timing of it all (nobody's fault) this time the PC probably won't be on the bench until Tuesday or so of next week and probably not back in my hands for 10 days or more...hopefully without any additional issues or problems from shipment. Like I said...frustration...maybe a good night's sleep will help.
 
Well, this is why VM is awesome. Working with Dell, it would be near impossible to get any upgrades or repair, let alone for free. Makes me wonder as a student about why we buy Dells in the TDSB, instead of VM...

Hope BadAxe 2 solves your problem, coachjohn.
 
Back
Top