This machine is going to be used for rendering CGI and post-production. There are some small details I'm not too sure so a little advice would be great.
Mobo: ASUS Z10PE-D8 WS
CPU: Xeon E5-2630 v3 2,4 GHz
Memory: Kingston ValueRam DDR4
PSU: Seasonic X-1250
HSF: NOCTUA NH-12DX i4
GPUs are already covered from my old build, as well as the Samsung 840Pro.
I would like to know if I need additional cables for connecting the PSU with the mobo, since there are 2 CPU power connectors (8-pin EPS 12v) Or would someone suggest a different PSU altogether?
Any suggestions on a case, can't really find on that explicitly says EEB the only one to specify is the Cooler Master Cosmos 2. I already have the Cosmos S but looking at the specs of the ASUS mobo I doubt the holes are going to align. Although EEB standards are the same than EATX but there are secondary placements that don't align.
Puget Systems use a Fractal Design Define XL R2 for the same build but again EEB not mentioned.
The only thing left are some HHDs for a RAID1 setup to store work. Does not have to be super fast or fancy. I foud some TOSHIBA 4TB MD04ACA400 cheaper than WD or HGST.
Any advice is appreciated
Mobo: ASUS Z10PE-D8 WS
CPU: Xeon E5-2630 v3 2,4 GHz
Memory: Kingston ValueRam DDR4
PSU: Seasonic X-1250
HSF: NOCTUA NH-12DX i4
GPUs are already covered from my old build, as well as the Samsung 840Pro.
I would like to know if I need additional cables for connecting the PSU with the mobo, since there are 2 CPU power connectors (8-pin EPS 12v) Or would someone suggest a different PSU altogether?
Any suggestions on a case, can't really find on that explicitly says EEB the only one to specify is the Cooler Master Cosmos 2. I already have the Cosmos S but looking at the specs of the ASUS mobo I doubt the holes are going to align. Although EEB standards are the same than EATX but there are secondary placements that don't align.
Puget Systems use a Fractal Design Define XL R2 for the same build but again EEB not mentioned.
The only thing left are some HHDs for a RAID1 setup to store work. Does not have to be super fast or fancy. I foud some TOSHIBA 4TB MD04ACA400 cheaper than WD or HGST.
Any advice is appreciated