First Complete X38 Water-Cooled System (I think)

domenic

Weaksauce
Joined
Apr 7, 2006
Messages
69
This is based on the new Gigabyte GA-X38-DQ6 MB. I had been planning / working on this for a few months now and after the X38 board arrived last week I put everything together.

MB = Gigabyte GA-X38-DQ6
CPU = Q6600 – G0 Stepping – FPO/Batch # = L731A364
Memory = PATRIOT DDR2 2GB PC6400 DUAL LLK (4GB Total)
Video Card #1 = XFX 880GTX 768MB
Video Card #2 = Generic GeForce 7600 GS (for 2nd & 3rd monitors)
SoundBlaster X-Fi
Power Supply #1 = Antec True Power 2.0 550 (just for the MB & main HDs)
Power Supply #2 = (behind not visible) generic 550w for all fans, pumps, other drives, etc)
2 x 150gb Raptors
Monitor #1 = Dell 30”
Monitor #2 = Dell 20”
Monitor #3 = Dell 20”
Case = Cooler Master Stacker Case - Painted in my garage
D-TEK FuZion CPU Block
Laing DDCT-01 18w pump with Petra Top
76 Chevy Caprice Heater Core
Reservoir from PVC elbows.
10 x 120MM fans (4 x on the rad, 3 x on the bottom of the case, 2 in front of the drive cages, one in the back)
1 x 92mm fan (attached to the waterblock to blow on the X38 Chipset )

Speed = 3690 (410 x 9)
3DMark Score = 7692 @ 2560x1600
Very stable at the clock speed so far, Prime 95 on all cores, etc

Some pics below, more here:

DSCF0413.jpg


DSCF0423.jpg


DSCF0432.jpg


DSCF0443.jpg


cpu-3690.jpg
 
The MB works great and seems to overclock like a monster. Even between failed attempts it nicely restarts and backs down to a default speed (I had Windows booting at 4Ghz but not stable with Prime 95). I haven't needed to reset the CMOS with the jumper yet. This is encouraging since I am using the latest beta bios still. Once this thing settles down I think it will do even better.

DOM
 
Damn those wires killing the look. you definately need to work on that my friend.
 
Wow that setup is seriously overkill for just cooling the CPU. I agree the wiring needs work and the PVC is far too big, nice to see some more DIY type setups though. Your monitor setup is to die for though /drools
 
Wow that setup is seriously overkill for just cooling the CPU. I agree the wiring needs work and the PVC is far too big, nice to see some more DIY type setups though. Your monitor setup is to die for though /drools

Yeah, you need to replace those monitors with something crappier-looking to suit your case. I'll do you a favor and trade you my old NEC 22" CRT for your current setup.
 
add the gtx to your loop, get rid of the pvc pipes and put regular res in there, even a micro res will do the job and look sweet, also get better cleaner clear tubes and use a red dye so it will tie into your case better, hide all the wires and make a special housing for your rad and heat core so it doesnt just stick out from evrything. also get better psu so they dont blow on you, maybe corsair, and that will make the cable management easier for you, like get the 620 watt one for the main stuff, then a 450 watt one for the extras.
 
Can you post your bios settings? I am having a hell of a time getting a G0 with the same stepping running at 3.6
 
Back
Top