First Build = EXPLODED, 2nd Build Soon, Need Reconfortation Help!

Shogo

Limp Gawd
Joined
Jun 1, 2004
Messages
389
Haha ok well 1 year ago, ive built a complete rig for my girlfriend, it was an a64 3000+ , msi neo fsr s754,1gb corsair value select pc3200, enermax PSU 350w, 9800XT, 120gb Maxtor ide drive. OK so it was my first build, the cpu was retail so it came with the stock heatsink.

Im playing with computers since im 10 years old, like replacing videocard, ram, hard drive, psu, stuff like that, but i never got the chance to build a complete rig so when my girlfriend said that she wanted a pc i decided it could be a good idea to order the hardware and build it up myself for fun. Unfortunatly fun turned into sadness with tears on my cheeks ahha.

So i plugged everything as normally, for the thing i did for the first time (mounting the cpu and the motherboard in the tray) ive read the step by step instructions to be sure i wasnt forgetting anything. Ok now everything is in place, i leave the side panel open so that i can see the fan spinning just to be sure. I press the power button, POW!!!!!! well not that big POW but like a little Pfff coming out from the mobo, and a little puff of grey smoke coming out of the mobo, just besides the northbridge.

I pulled out the power cord as fast as i can and realised that i maybe killed 1500$ worth hardware. (And do i need to mention that this money comes from my girlfriend so i felt twice bad ahha) So i unmounted every piece of the computer, put a fan in front of it to remove the burn smell, and returned the pieces to the retailer and told i didnt have the time to build it up (hmm sounds cheezy)

2 days after the shop call me back, and tell me that the computer is up and ready to go.

NOW, I never knew what wrong happened, did the store tought that they were the one that broke the PC and replaced the system? Did it survived? I DONT KNOW, and since then ive played with alot of pc , building dual xeon servers with scsi hard drives but the cpu were already mounted on the mobo.

In one week i should recieve pieces for my new build, a high end pc, amd64 4400+x2, 2gb g.skill PC4000 2x1gb dual channel, 7800GT, XP90, DFI-lanparty nf4 s939, Lian-Li v1000B.
BUT IM AFRAID . ahha, i know how to build it, im just afraid that im cursed.

What do you guys think can be the cause of that problem? Its not like ive plugged the mobo power conector into an IDE drive or something hehe, everything was plugged smoothly. The only thing im not 100% sure is the front panel connector because i didnt have the mobo booklet...

Im crying
 
That was my guess too... If you need any help, just aim one of us while your doing it ^_^
 
When I worked at a computer store we got a computer like that once. More money was spent on fans and case lights than the actual computer. This was when Socket 754's were the best and it was an original Athlon surrounded in see through colored plastic, we pretty much called the guy an idiot to his face.

Not to say you are one.......... :D
 
Yes ive put the standoff screws so that the motherboard tray isnt touching the case BUT maybe ive put more standoff screws that i needed and it touched the back of the motherboard or something like that...

Boltaction Hehe i understand what you mean, i know this computer wasnt one of the best harware ever but it was for my girlfriend.. this computer was built in a coolermaster Centurion case, no fancy light or fan, money wasting.

But talking about the standoff screws, normally those one are not conductive? and behing the motherboard there is some kind of aliminium washer to protect the board from shortage.

I should know more about electricity, it could be usefull in that case, knowing whats possible and whats not.
 
< begin_threadcrap >

Hey Shogo - I'm the guy that did a little editing on your thread title. Per the rules:
(9) No SHOUTING (Posting in all capital letters) It’s hard to read and just plain rude and annoying.
No worries, just a heads up.

Thanks and good luck with the build - BlindedByScience

< end_threadcrap >
 
Oh no problems, sorry for the Shouting ehe i was just going crazy.!

so does anyone has any idea why this could happend, is it possible that by plugging the front panel connectors to the wrong plug on the mobo can short the board? Like if i plug the power button into the reset pins... i didnt have my mobo booklet so i just guessed.
 
If you saw smoke, something was definitely damaged.

It's my guess they thought they sold you a bum system board and they switched it out for you without telling you...which may indicate they gave you a bad part to start with that they were hoping wasn't really bad.

In any case, if they didnt come up with a reasonable story, I'd stay away from them in the future.
 
So you think its possible that the board was already damaged before i even pressed the power button?
 
Lets just say I have lots of expereince replacing bad 'new' replacement system boards that passed someones QA process. (IBM and HP perhaps...;) )
 
Oh, so you were the one that had us replacing $1,500 worth of PC components... :mad:

:p
 
Shogo said:
Yes ive put the standoff screws so that the motherboard tray isnt touching the case BUT maybe ive put more standoff screws that i needed and it touched the back of the motherboard or something like that...
.

Make sure you only put standoffs that there are holes for in the motherboard! Should be 9 total, 3 rows of 3.
 
1c3d0g said:
Oh, so you were the one that had us replacing $1,500 worth of PC components... :mad:

:p


LOL...

I quit doing that about 4 years ago, but I probably did more than $1500 worth in any given two or three month period.

Business PC replacement parts are the biggest joke you could ever get.

I got to the point where any of my techs who got bad replacement parts was ordered to write 'BAD' all over every part they sent in (with indelible ink markers too) so the parts wouldn't get sent back as 'tested good' or some other BS.

Man...if your one of the OEM parts testers or refurbishers, you deserve a good thrashing.
 
Back
Top