Firewire ports dead?

Sidane

n00b
Joined
Apr 6, 2003
Messages
59
Having a strange problem with the firewire ports on my work computer.

For whatever reason the onboard firewire ports have stopped working. The mobo is an Abit IC7-G with one rear and one front firewire port.

I've plugged in both an external hard drive and a DV camcorder unit. Neither are recognised by XP Pro.

I desperately need the firewire port for digitising video but don't know if it's a hardware or software problem.

I did some reading and found a document describing firewire port failure. I did stupidly force a firewire cable into the front port upside down which may well have fried it. But would that fry both the front AND back ports, neither of which are working?

If it's a software problem I'll reinstall Windows.
 
First ensure that the driver is (correctly) installed. Reinstall the driver if necessary.

Isn't it physically impossible to insert a firewire connector upside-down?
 
What exactly is the best way to reinstall the driver?

It is possible to put it in upside down, if you push hard enough :(
 
Actually turns out the port is working ok. Managed to get the external hard drive recognised.

My DV deck still won't work though which is the most important thing because I need to digitise a lot of video so it's definitely a software issue.

How do I go about reinstalling the Win XP firewire drivers?

If that doesn't work I'll probably have to resort to reinstalling XP from scratch as my need is urgent.
 
Usually reinstalling a driver is as easy as going to Hardware Manager -> select device -> uninstall -> reboot system -> install driver (should be auto-detected) -> reboot -> done.
 
Back
Top