Final Rig Setup - Replies?

AllLiving

Gawd
Joined
Sep 26, 2002
Messages
696
SOLTEK "SL-K8TPro-939" VIA K8T800 Pro Chipset Motherboard for AMD Socket 939 CPU -RETAIL

AMD Athlon 64 3200+ 2.0GHz, 512KB L2 Cache 939-Pin 64-bit Processor - OEM

CORSAIR XMS, Xtra-Low Latency 2-2-2-5, 184-Pin 512MB DDR PC-3200 w/ Platinum Heat Spreader, Model CMX512-3200XLPT - Retail

(Going to buy another stick of this in a couple weeks)

$421 Total
 
"However, the broken PCI/AGP frequency lock on the Soltek makes it a poor choice to get the most from the new 3000+, 3200+, or 3500+ Socket 939 processors. We saw in our recent review of the new 90nm processors that most could reach 2.6GHz with not much effort. With 2.6GHz as a target, it is easy to see that we would need a 289 setting for the 3500+, 260 for the 3200+, and 236 for the 3500+. With the AMD + Series locked at the top, the only 90nm that could come close to 2.6GHz on the Soltek would be the 3500+, which, at 228 x11, could reach 2.51 Ghz. There is no such issue with the FX processors, since they are unlocked up or down, but frankly, they are very expensive and the end-user is not likely to be looking for a value Soltek to use with an $800 CPU."
-AnAndTech.com Review


Hope you weren't planning on doin alot of overclocking (unless they released a BIOS patch?)
 
Get the MSI plat please man you'll thank youself in the end.. i promise.
 
you'll generally be better off sticking with the major brands..

ASUS, ABIT, and MSI

They will stand behind their products, and regularly release updates
 
Why does everyone ignore the Epox. I set up mine this weekend and
as my sig shows.... For a first attempt at overclocking this board it's
working great for me. Dual channel mode and all. I did flash to the newest bios though. But it was stable even before that. This is my first
amd64 overclock. Still figuring out htt and all the divider stuff. Keep
posting info and I'll keep fiddling with it. The pci lock seems to work
fine on this board.
 
Back
Top