Fileserver stops respond, Id like to solve it :)

Damodred

Limp Gawd
Joined
Feb 27, 2007
Messages
171
Hello

I've had a fileserver (the one in my sign) for a few years now. Every now and then it just stops. No blue screens, just hangs. Sometimes it happens when I transfer files and therefor I thought it could be the networkcard drivers but seeing as they are from DFI it shouldnt be any problems. Also have the same motherboard on another computer with the same drivers and there it works without a flaw. Anyway, sometimes it can be up for two or three months, sometimes it dies after fifteen minutes. I tried to read the Event Viewer but it only says something like "The last shutdown was unexpected". I've ran Prime95 and memtest86 for 24 hours, no problems. I've looked at the temps and they look alright, all drivers are properly installed. Now Im out of ideas. I have ordered a few more disks and Id like to solve these instability issues before I add them to the computer.

Thanks in advance
Regards
 
Are there any events that allways get logged just before the unexpected shut down?
Have you tried updating the drives to the latest version from the chip set manufacturer? Just because the latest DFI driver work fine on the other machine, doesn't mean it should work fine on the file server.
Are you running antvirus software on the file server? If so have you tried disabling it?
 
Hmm no I havent. I was under the impression that two motherboard models with the same setup should work the same. Im running Nod32 on both machines, havent tried to disable it but will do just after this post. There are no events logged at all. Its just like a powershortage or similar cause there are no real reason to why it would stop. It never dies under heavy load, so far it has only been when it stands in idle and/or under light load like streaming a movie. But I shall take a new look at the drivers. Thanks :)
 
For the RAID controller in the file server have you looked at updating its drivers? Does it have any management software? Or are you doing software ware RAID?
 
Its pure software raid5 (and Im more than satisfied with the result from it, but thats another thread). I did something else now, I replaced the ram and put in some new (tested). Also turned off the networkcard. I will let the server resync and then I shall do some chkdsk fun (almost 5tb take some time mind you), and after that I will do some more ram- testing. I looked at the raidcontrollers drivers and they all seem to be at the latest version, May 2005... Problem is that these problems are so random that its hard to see a pattern, at least I cant. Switching ram might be the easy way to start with :)
 
Back
Top