• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Feser One

I have been running the feaser1 with a DD Acrilic top for over a year now with no issues whatsoever. When I did my yearly flush/rebuild the loop was clean and free of any gunk. I would say if you are going to use a pre-mix this is the stuff to use.
 
Just use distilled water and some PT Nuke. The feser one will stain the acrylic. The dye will eventually separate from the fluid and either gunk up your waterblock or settle in your tubes. MrGoat may have had a good experience, but the experience that I've described seems to be what happens to most people.

If you're stuck on Feser one, go with the clear version and get colored tubing.
 
tuanster1119 said:
Just use distilled water and some PT Nuke. The feser one will stain the acrylic. The dye will eventually separate from the fluid and either gunk up your waterblock or settle in your tubes. MrGoat may have had a good experience, but the experience that I've described seems to be what happens to most people.

If you're stuck on Feser one, go with the clear version and get colored tubing.
Click to expand...

"QFT"!!!!!!!!!!!!!!
 
Replaced all of the FluidXP+ Nano fluid I had in my loops with Feser One clear (blue UV) fluid, it looks fantastic. I'm running all Feser Rads (dual X-Changer 360's in white) with Feser tubing, EK Bay Res and Danger Den res (all acrylic).

Fluid XP was staining everything, now it's nice and clear.
 
You must log in or register to reply here.
Back
Top