Feggin Bios Issues.

slowbiz

2[H]4U
Joined
Aug 24, 2004
Messages
2,457
I just got this new motherboard about a week ago, along with a new case and what-not. I'm happy with the whole kenish, but there's two problems that seem to escape me.

When I turn on my computer, nothing really happens. The computer turns on and all, but it doesn't really boot up and my monitor doesn't get any signal. If I press the reset button, it then boots up normally. I'm not sure what is going on.

The other thing is about every tenth time or so, when I turn the computer on, it says there's a bios checksum error, and it tries to update the bios from the cd rom. Once again, pressing the reset button seems to fix the problem temporarily.

The motherboard is an Asus P4P800 SE.
I updated the bios with an Asus windows bios update program to 1005 (I see they just released version 1006, which I will try shorty)
The case has a 400 watt power supply, so I don't think it's any power issues.
My cpu is P4 2.80E GHz (not overclocked)
2x 512mb of PC3200 running dual channel
Gigabyte Nvidia Geforce FX 5900XT 128mb
blah blah blah

Any ideas?

I nearly forgot one thing. I was playing an Opposing Force lan game with my room mate yesturday, when my computer froze and restarted. It's never happened before, and I'm not sure if it's related with my other problems.
 
The cpu is running at around 43 degrees celcius... so no. All the hardware is in tip top as far as I know.
 
Checking your RAM timings.... I had a smiliar problem on my IC7-G MAX II... because I had the timings all off.... fixed the ram timings.... been fine ever since...... :D


Keep on Folding!!

 
Right now, all the ram timings are set to automatically detect.

I don't know the first thing about what they should be at. Could someone help me with the configuration of that?

Right now the timings are as follows.

2.5,4,4,8

I've got 2 512mb PC3200 sticks running in dual channel mode.
 
I had the same problem on my fiancee's IT7-MAX2. It turned out to be a memory setting that I found in the Abit support forums. Dig through the Asus support forums, if they exist, and see what you find.
 
I think (going on memory from 6-8 months ago) that mine are 2,3,3,11... 2 being CAS... I have 1 GB of Corair PC3200 Platinum.... try some different things..... but I'd search around on here or other forums for the best timings for your RAM......


Keep on Folding!!

 
Not all 400 Watt power supplies are created equal. Is yours a name brand or a POS that came with the case for "free". Look into your 400 watt power supply. If you see empty space above the circuit board and pitifully small heat sinks on the transistors; if you can physically pick up the power supply and it doesn't "feel heavy", then don't count on it putting out 400 watts... well, maybe on a cold day and for about 5 seconds. A good 400 watt PS will be jam packed with huge capacitors, large transformers, and nice beefy heatsinks.

I say this because too many people think that just because a power supply says "400 Watts" that's it's just as good as any other. It's no different than those cheesy car stereo amps that claim to be 1000 watts and other rubbish.

Your 2.8E, gig of RAM, and 5900XT need a power supply they can rely on. Also, make sure you've got all your power connections to the motherboard and video card securely and fully attached.

If you do have yourself a good power supply, I would look to the BIOS like other people have said. Changing settings can make a big difference in stability.

But to me, it sounds like a power supply issue.
 
Back
Top