Far cry AA+HDR patch

You say 'works on geforce series 6 and 7 cards' but that shouldn't be the case with HDR (FP16) + AA in conjunction with each other...
 
tornadotsunamilife said:
You say 'works on geforce series 6 and 7 cards' but that shouldn't be the case with HDR (FP16) + AA in conjunction with each other...
Click to expand...

Many GF owners tried it, but as espected FP HDR+AA doesn't work simultaniously.
 
HDR + AA doesn't work on Geforce 6/7, even with the patch. Members at Anandtech confirmed this. When Guru3D say "works on GeForce series 6 & 7", they mean the patch itself. Not the HDR + AA capability.

HDR + AA can't be done on Nvidia's current cards, it's a hardware issue.
 
bbbbBUMP..

I have tried to enable HDR+AA on my X1800 XT but I can't figure out how. According to displayinfo I am running the SM 3.0 path, and then I set HDRRendering to 7 but when I do i lose my AA.


Can anyone help?
 
*edit* I did an awesome job at reading the date of the OP. Seems to work on my card at a large framerate hit
 
When I instal this patch farcry won't launch anymore. It won't change the resolution and go to the loading screen. It just shows the preload and disappears. I doubt it but it could have something to do with me having the original German version of the game. I did patch it to v3.4 or whatever the latest thing is.
 
Install all patches (1.1 / 1.2 / 1.3 / 1.31 / 1.32 / 1.33) and then follow closely the instructions provided in patch 1.4.
It works.
 
Apple740 said:
Install all patches (1.1 / 1.2 / 1.3 / 1.31 / 1.32 / 1.33) and then follow closely the instructions provided in patch 1.4.
It works.
Click to expand...
I did that and I'm as sure as can be that I put the files in the right place.
I only installed patch 1.3 / 1.31 / 1.32 / 1.33 you think uninstalling and adding patch 1.1 / 1.2 will make it work?
 
well it doesn't work with the 64 bit farcry patches and 2 7800gts. I enable both of them and I get to see through everything.
 
Hartz said:
I did that and I'm as sure as can be that I put the files in the right place.
I only installed patch 1.3 / 1.31 / 1.32 / 1.33 you think uninstalling and adding patch 1.1 / 1.2 will make it work?
Click to expand...

Like is said, install them all. And ofcourse you'll need a Ati X1K card but i assume you knew that.
 
I have installed all the patches, and I an an X1800 XT. I still can't run PS3 with AA.

Could you go over the commands you use?
 
From the read-me file (+ i edited something);

To enable HDR+FSAA...

1) copy the files in the bin32 and FCdata map (the ones from the patch) and paste them into your installed bin32 and FCdata map. When prompted for "overwrite", chose "overwrite all".

2) set FSAA to application controlled in Ati CCC.

3) In-game go to the Farcry video menu; set all the graphics options to very high and select a FSAA mode in the Farcry video menu. (i didn't test 2 and 6, but 4 works for sure)

4) Go to the console (~) and...

- type \r_FSAA 2

press Enter

- then type \r_HDRRendering 1-11 ("7" looks best, "2" is also nice and has better performance)

again press Enter, leave the console (~) and enjoy!
 
You must log in or register to reply here.
Back
Top