Fans turn on, but computer fails to POST - quick, specific question

tim0chen

n00b
Joined
May 17, 2005
Messages
50
Okay, I've already done a search on this topic, and as instructed by previous posts, I tested my mobo/PSU/cpu outside of my case. Since this setup still doesn't produce a POST beep, I've concluded that one of those 3 parts - the mobo, PSU, or CPU, must be the culprit. So far so good, right?

There's one more piece of information, and I'd like to know if it makes a difference. The moment my computer stopped POSTing occurred immediately after a crash. The computer's been running fine for months (with occasional cpu overheating or memory problems, which I've fixed) then all of a sudden it crashes without a blue screen and fails to POST afterwards. Does this additional information give any indication as to whether the problem is due to either the PSU, mobo, or CPU?

My current plan is to buy both a PSU and a mobo, and if replacing both doesn't solve the issue, then it must be the CPU at fault. Does this sound like a good plan? If you guys can narrow the culprit down to 1 part, I won't have to waste money on extra parts to replace an item that was already working properly.

Thanks in advance for any suggestions!
 
I'd change one thing at a time, unless you really want to buy both a PS and a motherboard.

Have you tried to see if you can get a POST error beep after removing all add-on cards (video, sound, etc) and the memory?

Have you reset the CMOS?
 
I would first test the powersupply to see if its working. Sometimes when the powersupply goes, you can turn it on and a few seconds the fans spin, then turn off. But nothing turns off at that point except a small surge into the fans.

Try looking at the motherboard for any signs of burnt areas, blown caps, or something else that might suggest the motherboard is toast.

But it would also be helpful to post your complete specs on your system, including the made and model of powersupply.
 
Your going to need ram installed in order to post, don't know if you have been trying to get it to post without ram, but if you have, that could be a problem. Also, fried ram can cause failure to post, so if you have another machine that you can use to test the ram, that would be a good place to start. Run memtest for twelve hours or so and see what it comes up with.
Another method would be to try running with one stick (assuming your using two) and try switching their positions...
 
Thanks, I appreciate the help guys.

I got a new motherboard today, and I'm running my setup with the power supply, 1 stick of memory, and the cpu/heatsinkfan... still not posting :(.

Any advice on what I should try replacing next?

Here are my specs:

CPU: AMD X2 4400+
Memory: OCZ Platinum 1GB
Motherboard: Asus A8N32-SLI Deluxe
PSU: OCZ Powerstream 520W

If it helps, the PSU is about 6 months old, memory a couple of months, mobo brand new, and CPU 1 1/4 years old.

I guess I'll try replacing the PSU now? Is it pretty much guess-and-check from here?

Oh yeah, and just to confirm: right now, all I have hooked up are: my mobo w/ the 24-pin ATX, 4-pin ATX 12v, CPU w/ heatsink/fan, and 1 stick of memory - outside of the case. With this setup, my motherboard should beep when I turn it on, right? I'm working off the assumption that since it's not beeping, one of the parts is broken; but if the mobo is not supposed to beep with this setup, I could be stressing for no reason and might have to add more components before making a conclusion.
 
Back
Top