fans on silverstone raven v2

[jjolin]

http://www.newegg.com/Product/Produc...-154-_-Product

i have this case, if i flip the 3 intake fans on the bottom and make them exhaust, so air gets blown out of the case, and i get 3 of these and put them in the front

http://www.amazon.com/SilverStone-Al...628708&sr=8-35

would it improve airflow or mess with it since i flipped the 3 180mm fans?

 

[Bootleg Usher]

The entire design of your case follows the principle "hot air rises" so you would be ruining that.

 

[FaRKle0079]

None of your links work.

Turning the intakes to exhaust is a bad idea as it goes against the natural flow of heat (up). What happenns when the heat gets exhausted out of the bottom? It'll just sit there and rise around your case anyways. You might not mess with the airflow, but you'll mess with the already fantastic thermal management of the case.

 

[HelioX]

This is a terrible idea.

You want the bottom fans to be intake, you want your HSF to exhaust out the top, with one other fan up there for exhaust. I've replaced the stock fans in my RV02 and the airflow is great, if you reverse the airflow in this case then you're going against the basic design/principle of it.