Fan replacement on a Cooler Master V8

veterator

[H]ard|Gawd
Joined
Oct 26, 2005
Messages
1,909
I have been noticing that my CPU in my main machine had been running a little hotter than i would expect with the temperature dropping outside and it generally being cooler in the house.

So the V8 Cooler Master I have is only getting up to like 400 RPMs ever. Fan is shot for whatever reason. I need to pull the cooler off the motherboard or figure out how to detach it without removal.

Before I get into that, I want to have a fan replacement on hand that will get the job done. A lot of the fans are rated as "case fans" damn near everywhere I look. And I've been trying to find the CFM ratings on these things, but have to delve into the specs on the various websites at their different "turbo"/"quiet"/"max"/"whatever".


So basically, I know I need:

1) Something that will fit in the cooler. It APPEARS to be a 120mm x 120mm x 25mm fan in there now. I am hoping someone has some experience and can tell me what they've had luck with on replacements.

2) I need a CFM above 65. It looks like the fan that came with it was rated at high 60s according to their website.



I don't care if I eliminate the knob on the cooler, I personally don't use it. I'm guessing PWM will be useful for noise and longevity. I don't particularly care about noise as long as it isn't rattling or high pitched/whining. Longevity would be nice.


So........hoping I can get some quick replacement suggestions so I can order something tomorrow and get my main machine up and running again. Massive PITA removing the heatsink to replace the fan, so I would like to not have to do this again for awhile.
.
 
Got the cooler off, couldn't get squared up to the screws to get the fan out with it still attached.

Put the stock cooler in to get the machine running.

Fan off the V8 will barely turn just turning it with my finger. So I am shocked it was able to spin at all. And the fan had some oily spots on it, guess something blew out in the inner workings of it.

Some investigations on my own seem like I want a high pressure fan like a gentle typhoon (higher RPM) or a corsair fan I was looking at. They have more fins Although I haven't ran into any reviews where someone has used one to replace their V8 fan, so I have some concerns on fit.

Still hoping someone out there replaced the fan on their V8 successfully. That thing is a bastard to install and remove in my case, so I want to do it with a good fan and be done.
 
I have, I am using a Bgears B-ice blue shiny nonsense fan I had in the closet and it works fine after trying several different fans in it. Actually runs cooler than it did with the stock fan. Its pretty easy to get apart as well.

The V8 likes lower speed fans with more CFM rather than static pressure, it does not scale well with RPM like the 212/V6 shaped ones do. I believe this has to do with the fan being in the center rather than a push/pull setup.
 
Back
Top