Exchanged Ultra for 6800 GT, same problems! Please help me troubleshoot

jonesad

Limp Gawd
Joined
Jul 23, 2004
Messages
185
Hello,
I am having some issues and I need some help. I've had my system (in sig) running stable for over 6 months. On Tuesday I got my 6800 Ultra in the mail and put it in. Immediatly after benchmarking, playing games it crashes and creates horrible artifacts on the screen screen shot . So, I changed the voltage on my AGP slot to 1.6 as some people recommended, same problems. Then I thougt it was the power supply, so I got an Antec 550 watt true control and put that in. Same problems, only worse.

So, I went to fry's and got a BFG 6800 GT last night, put it in, same problems (artifacting, strolage trails). I did forget to set the AGP vtage back to 1.5 but didn't think of that till this morning. Then I thought it was the motherboard, so I took the BFG card back to Fry's and exchanged for a DFI lanparty 875 Pro. Got that all set up, put the Ultra in and same issues. On a whim, I hooked my Antec 430 power supply back up and everything seemed to be working. Ran some tests, it was all good. BUT this morning I ran 3dMark 03 again and it went crazy, not just artificating, but horrilbe corruption everywhere. I am really at a loss and could use some help. Here are my thoughts:

(1) I never had any issues till I put in the Ultra so I doubt it is CPU or memory
(2) Since I forgot to set the AGP voltage back to 1.5 when I put in the BFG could have caused the issues with that (and it was a returned model, so maybe it was faulty? But who gets 2 bad cards in a row?)
(3) Could the ultra have fried my AGP slot? If so, I hope it didn't on my new motherboard.
EDIT: (4) I have made sure to give each card (the GT and Ultra) dedicated power lines from the PSU

My temps are all normal. I really need some help guys.
 
All of this seriously sucks. Have you tried reformatting and all of that?
 
jonesad said:
Hello,
I am having some issues and I need some help. I've had my system (in sig) running stable for over 6 months. On Tuesday I got my 6800 Ultra in the mail and put it in. Immediatly after benchmarking, playing games it crashes and creates horrible artifacts on the screen screen shot . So, I changed the voltage on my AGP slot to 1.6 as some people recommended, same problems. Then I thougt it was the power supply, so I got an Antec 550 watt true control and put that in. Same problems, only worse.

So, I went to fry's and got a BFG 6800 GT last night, put it in, same problems (artifacting, strolage trails). I did forget to set the AGP vtage back to 1.5 but didn't think of that till this morning. Then I thought it was the motherboard, so I took the BFG card back to Fry's and exchanged for a DFI lanparty 875 Pro. Got that all set up, put the Ultra in and same issues. On a whim, I hooked my Antec 430 power supply back up and everything seemed to be working. Ran some tests, it was all good. BUT this morning I ran 3dMark 03 again and it went crazy, not just artificating, but horrilbe corruption everywhere. I am really at a loss and could use some help. Here are my thoughts:

(1) I never had any issues till I put in the Ultra so I doubt it is CPU or memory
(2) Since I forgot to set the AGP voltage back to 1.5 when I put in the BFG could have caused the issues with that (and it was a returned model, so maybe it was faulty? But who gets 2 bad cards in a row?)
(3) Could the ultra have fried my AGP slot? If so, I hope it didn't on my new motherboard.

My temps are all normal. I really need some help guys.

Are you willing to format and do a fresh install? I suspect a rogue driver conflict somewhere.
 
Try underclocking the BFG cards and see if it fixes it.
 
Yes, it sucks very, very bad. I have done a clean install almost every time.
 
The BFG card I took back and exchanged for the new motherboard. So I'm stuck with the Albatraon 6800 Ultra, and possibly 2 motherboards it fried...:(
 
jonesad said:
The BFG card I took back and exchanged for the new motherboard. So I'm stuck with the Albatraon 6800 Ultra, and possibly 2 motherboards it fried...:(

didnt see you had a truepower 550
 
I have to disagree on the power supply issue only because I bought the big beefy 550 watt power supply and it only made the problems worse.
 
You made sure to install the motherboard's chipset's AGP drivers BEFORE the latest Forceware right?

And make sure to just use DirectX 9.0b
 
Hello,
I did make sure to install motherboard drivers first on each clean install.
 
So let me see:
2 different power supplies
2 different mobos
2 different video cards
freshly formatted windows install (I assume you installed all the latest chipset drivers, DirectX 9.0c and latest Forcewares?)

Sounds like extremely bad luck getting 2 bad cards. Do you have a friend that could try installing the card on their machine?
 
jonesad said:
The BFG card I took back and exchanged for the new motherboard. So I'm stuck with the Albatraon 6800 Ultra, and possibly 2 motherboards it fried...:(

My god you have a lot of disposable income, you must work for the Illuminati or something :eek:

On topic though, I'm sure those boards are still RMA-able, as you didn't do anything to delibertely void the warranty.
 
joemama said:
So let me see:
2 different power supplies
2 different mobos
2 different video cards
freshly formatted windows install (I assume you installed all the latest chipset drivers, DirectX 9.0c and latest Forcewares?)

Sounds like extremely bad luck getting 2 bad cards. Do you have a friend that could try installing the card on their machine?

Yep, thats the process right there. I do have a friend but I'm affraid to let him try the card in case it is screwing up the AGP slot. Right now my plan is to RMA the Ultra, get a new card (maybe go back to ATI camp) and see how it does in the new motherboard. If the problem prosists, then I have no idea.

EDIT: What really stinks is I already sold and sent off my old 9800 Pro so I can't test it with that to see if that card works fine.
 
kuyaglen said:
Try testing the ram.
How would I do this? I've never had to before? I did try booting with the different sticks and had same issues.
 
This problem calls for some very thorough tests.

1) remove all of your RAM sticks except one.
2) Disconnect all unnecessary hard drives, CD-ROM drives and even floppy drives.
3) completely reset your CMOS for the BIOS to be back at default everything. Then run through the BIOS and load the safest settings.
4) do tests for stability.
 
Have you tried opening the side of your case and pointing a fan in there? If it was running right until 3DMark then I am going to guess heat.
 
i absolutely would not rule out two bad cards, especially if one was a white sticker card from fry's, and you goofed on the voltage (which normally wouldnt cause that much of a problem, but who knows)

i say put it in a friends comp and see if its the card, i doubt youll fry the agp slot cause the only thing (AFAIK) that'll do that is putting the wrong kind of card in the slot, in which case the video simply wont work anymore.

and this time for god sakes stay away from the white stickers (or better yet stay away from fry's altogether ;) )
 
Have you tried swapping the power to a different line for the hdd's and cd's? Give the GT a dedicated line... Try all combinations possible...
 
Deadguy said:
i absolutely would not rule out two bad cards, especially if one was a white sticker card from fry's, and you goofed on the voltage (which normally wouldnt cause that much of a problem, but who knows)

i say put it in a friends comp and see if its the card, i doubt youll fry the agp slot cause the only thing (AFAIK) that'll do that is putting the wrong kind of card in the slot, in which case the video simply wont work anymore.

and this time for god sakes stay away from the white stickers (or better yet stay away from fry's altogether ;) )

Yeah, I think you may be right. I may have just had the very unfortunate luck of getting a crappy Ultra, then getting a messed up white sticker from Fry's. That was the only one they had left so I took my chances. Ugh..this stinks.
 
^^^^^you definitely want the GT on its own molex, regardless of how big a powersupply you've got.

I learned that last weekend.
 
As a side note, both the GT and Ultra I have always given dedicated lines from the PSU.
 
I think you got really unlucky and picked up two defective cards back to back.

Can you try the card in another system such as a friend or neighbor?
 
its overheating, get a new case, preferably one with a side fan that blows over the videocard.
 
Try it in someone else machine before you say it's the card. If it works in someone else computer just fine, then it ain't the card. It's something in your setup.

Also, was it a brand new card or was it one that was returned to Fry's by another customer? If it was returned, someone else could of overclocked the crap out of it and caused the error. If it's a new card, then I find it hard to believe you got two bad cards.
 
Get an enermax or a fortron psu...

I had a true550 and a true430... I didnt like them that much.

I found a 470w Stealth for $50. Much better than the 430 it replaced... but it is far from stealth...its a loud little bastard.
 
I have a eVGA 6800 vanilla (or ghetto however you look at it) that I was having the same problem with. I searched high and low and could not find any kind of definitive answer. I tried all the updates and drivers that I could find for my system, but nothing worked. The kicker in all this is I was getting that same artifacting at boot up, before it went to the windows splash screen.I called evga and told them the problem and they said it was bad ram on the vid card. Maybe a cop out since they told me to RMA it to newegg and try another. Not sure but maybe there is some bad ram floating around on these boards.
 
Assemble the computer on a box out of the case (motherboard box works well for this), only hook up the bare minimum stuff, cpu, ram, 1 hard drive, 1 cd rom, keyboard, mouse, monitor just the power on/off switch and try it.

If it doesn't happen, start adding your cards one at a time then test, the system again. Keep going till it starts happening again.

If your still having the same thing happen after doing that, start part swapping, mouse, keyboard, monitor, power switch (note that you can use the reset switch as a power switch or when you want to turn it on just close the pins with a screwdriver just to eliminate this as one posibility), cd rom, hard drive.

Basicly just do a process of elimination.

I doubt highly that you fried the AGP slot in any way on two boards.

One posiblity that most don't consider is that it could be an incompatibility with there monitor as well.

Oh and the reason I suggest checking the power switch, I had a friend in Florida literaly replace everything in his computer over a two week period of time, trying to track down an intermitant problem where his computer would just shut off or crash out, he got so pissed off at it one time that he slapped the side of the case when it was shut down and the computer booted up, it was the power switch making intermitant contact that was the whole problem, it would sometimes happen when he started gaming heavily due to the base from his subwoofer, or sometimes not for hours untill the computer warmed up.

At any rate, I hope you get it figured out :)

Edit: Just an additional here. Couple other thigns to check for, or rather when you plug em in is your speakers, nic card, modem lines, etc etc, basicly anything that can be hoooked up to the puter, could be causing a small feedback power surge that could be the problem as well.
 
Thanks to everyone that has helped, some great advice here. Anyway, my plans are to go get a BFG 6800 GT at frys (I called to make sure it wasn't White label) and put that in. My question is, what are the chances, really, of the Ultra damaging the AGP slot? Because I still have the opportunity to return the motherboard as well and start completly fresh. Should I go that far, or is that overkill? I guess everything I've done thus far is overkill, so why stop now ;)
 
uhhh... IRQ conflict? Know what an IRQ is? If not that's probably it..

~Adam
 
jonesad,
Just curious, what kind of monitor are you using? Are you connecting it through using DVI? If so, have you tried another monitor or connecting using the VGA connector?

Franco
 
CleanSlate said:
uhhh... IRQ conflict? Know what an IRQ is? If not that's probably it..

~Adam

You know you do have a point. In a crude way. Anyway I do see that when I had the card installed it would be on IRQ 16 along with some sort of USB something or other. I am on my laptop so I am not sure what it exactly is.
Maybe an IRQ change could fix. I will try that.
 
Back
Top