EVGA E758-A1 + i7 930 = No POST?

jtsnow219

n00b
Joined
Mar 5, 2010
Messages
19
I recently bought an EVGA E758-A1 motherboard, i7 930, 6 gigs of OCZ ram (see below for full specs). I got everything set up and fired up the build and it doesn't POST, gets stuck on code 68 and tries again

So I start trouble shooting, and it turns out that DIMM port 3 is bad(so I thought), because it would post with a single stick in 1, and 5, but not 3. So I RMA it through newegg and get another board

Get it set up, and I get the EXACT same problem, port 3 is bad, will boot with memory in ports 1 and 5 just fine. Now I'm sure that the chances of getting 2 bad motherboards with the exact same problem is very slim, so I'd like to rule out that. The memory is good because I had another EVGA rig, and it boots just fine with all 3 sticks.

Could it be that the processor is bad or the motherboard needs a BIOS update to run with the new 930 i7? Gonna look at the evga BIOS update page and see if it says anything about correcting any problems for the 930

Id like to see if anyone else has had a similar problem or any additional troubleshooting I can do.

EDIT:
Updated the BIOS with the latest EVGA has. The computer now boots with all sticks in, but the BIOS only recognizes 4 gigs. Under computer -> properties, windows lists 6 gigs (3.99 usable). So it seems I'm getting somewhere...




CORSAIR Cooling Hydro Series CWCH50-1 120mm High Performance CPU Cooler -
EVGA E758-A1 3-Way SLI (x16/x16/x8) LGA 1366 Intel X58 ATX Intel Motherboard - Retail
Sony Optiarc 24X DVD/CD Rewritable Drive Black SATA Model AD-7240S-0B - OEM
COOLER MASTER HAF 932 RC-932-KKN1-GP Black Steel ATX Full Tower Computer Case - Retail
Intel Core i7-930 2.8GHz LGA 1366 Quad-Core Desktop Processor Model BX80601930 - Retail
ENERMAX Galaxy EVO EGX1250EWT 1250W ATX12V / EPS12V SLI Ready CrossFire Certified 80 PLUS BRONZE Certified Compatible w/Core ... - Retail
OCZ Gold 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Low Voltage Desktop Memory Model OCZ3G1600LV6GK - Retail
 
Last edited:
Played with the settings, its now at 1.65v, 8-8-8-24 and I tried 1066, 1333 and 1600mhz but nothing seems to work.

Doesn't matter which stick is in what slot....this is driving me crazy
 
Can you get it to work long enough to run memtest. Leave the ram settings on default in the bios. except the voltage which auto might run it at 1.5v, the ram might need a little more.

Also make sure you are using the green slots. Try it there if not.
 
Ive tried moving the memory to slots 2, 4 and 6 but it won't post at all that way, so it seems like it checks 1/3/5 first and gives up if it doesn't find anything.


I was able to get Memtest86 going. Got some interesting results.

I ran with all 3 sticks in slots 1/3/5 and about 10 seconds into the test the computer just restarted, so I took the stick out of slot 3 which is the one giving me trouble but it still restarts about 10 seconds into the test

Here is a picture about a second or two before it restarts

Could the CPU be bad?
 
Silly question, but what OS are you running? You know you need a 64-bit operating system to use more than 4GB of RAM, right?
 
I doubt its the cpu. You said the ram worked in a previous build, so I am guessing you did get another bad motherboard. Maybe a bad batch of them or something? O_O
 
did you check that every stick is usable? try to but each stick 1 at a time and try to boot to window. btw only use dimm1
 
Ya, I tried the ram every which way, just the slot 3 is giving me problems.

Im gonna try to return to newegg for a different board, any suggestions on that front? I liked EVGA but after this I won't be giving them any more of my money. How are the ASUS 1366 boards?
 
Call up EVGA and ask them about 930 support, it's not in the changelog of any of their BIOS's (even the one from March 10th). The BIOS before added support for 32nm desktop CPU's, which there's only one to choose from, so it may or may not have been included. I can't find a CPU support list on their site for this board. Call before you do anything else.

I've built many i7 systems on this EVGA board and also the Asus P6T Deluxe V2, and I like the EVGA way better.
 
I have the MSI X58 Pro-E and a i7 930. When I left the bios settings on default the board would only recognize 2 of my 4GB. After increasing the Vdimm to 1.60V the board saw the 2nd stick. If you haven't tried that try it out. No idea why it did that.
 
Last edited:
Ya, I tried the ram every which way, just the slot 3 is giving me problems.

Im gonna try to return to newegg for a different board, any suggestions on that front? I liked EVGA but after this I won't be giving them any more of my money. How are the ASUS 1366 boards?
It wouldnt be the first time newegg sent the same item you sent them back to you for RMA. They have done that twice to me, so chances are its the same board.

Also, slot 6 is the troublshooting slot.
I have the MSI X58 Pro-E and a i7 930. When I left the bios settings on default the board would only recognize 2 of my 4GB. After increasing the Vcore to 1.60V the board saw the 2nd stick. If you haven't tried that try it out. No idea why it did that.

Please tell me thats a typo and you really arent running 1.6volts in to an i7 with less then extreme cooling?


OP, set the vdroop to "with vdroop" and put vtt at +.3. This equals 1.4VTT, but the board will drop an even .05v under load. Ive done lots of testing with mine and a DMM, and thats how it always is. Set the ram to 1.65v as well. The vdimm doesnt droop, but the vcore and vtt both drop .05. If you set it to "without vdroop" then it overvolts at random ammounts. Its just easier knowing that its going to be .05 less then you set.
 
It's either the integrated memory controller (cpu) or your ram. And since the ram works in other configurations I'd say it's a bad memory controller in the 930. I'd rma the cpu.

Edit: I read about a similar issue on another forum a while ago (can't remember which forum), it turned out to be the cpu. You could probably just google something about the memory controller on i7 and find people with the same problem.

Found the link: http://www.tomshardware.com/forum/259931-28-could-defective-memory-controller
 
Last edited:
Please tell me thats a typo and you really arent running 1.6volts in to an i7 with less then extreme cooling?

Oops, yup that's a typo. I meant Vdimm is 1.6V. Fixed it in my post. I hope no one tried this on Vcore.
 
Definitely not the same board, I did an advanced RMA so I had both boards at one point.

After reading that Tomshardware article Im going to try to RMA the CPU.
When I run Memtest 86 it fails in the first 10 seconds so that sounds similar to his situation

Ill mess with the voltages tonight (at work atm) to see if I can get it to recognize the 3rd stick but I feel that I should not have to do that

I just hope newegg will let me RMA it seeing as I just RMA'd the motherboard
 
1 last update

Had a friend come over to help troubleshoot and we have found beyond a shadow of a doubt that it is indeed another bad motherboard.

We swapped processors, my system still had the same problem, his system ran like a champ.

Very disappointed in EVGA to say the least. Too late to get on the phone with Newegg support tonight, so I only hope I can RMA this board and get a different brand.

Thanks for all the help guys, and stay far far away from the EVGA 3x SLI boards, looks like it was a bad batch after all
 
1 last update

Had a friend come over to help troubleshoot and we have found beyond a shadow of a doubt that it is indeed another bad motherboard.

We swapped processors, my system still had the same problem, his system ran like a champ.

Very disappointed in EVGA to say the least. Too late to get on the phone with Newegg support tonight, so I only hope I can RMA this board and get a different brand.

Thanks for all the help guys, and stay far far away from the EVGA 3x SLI boards, looks like it was a bad batch after all

All companies have bad boards, no reason to swear it off. My is stable as can be, and never had an issue with it.

What type of cooler do you have? Some have backplates that touch a resistor on the back, and if its a screw in kind, if you do it even just a touch too hard, it will crush the pins. I found that out the hard way with my Swiftech water block.
 
ah did the mobo post for the other processor? i just ordered this mobo a used one from this guy and i bought a i7 930
 
Bad boards do happen. You did talk to the EVGA support folks, right? They make quick work of the RMA process. I think they will test the replacement board for you before they ship - think they did when one of mine died. While Newegg also rocks - once you get to the point where where you need to deal with the manufacturer, these guys were top shelf.
 
I bought one of the release day EVGA X58 3X SLI boards last year, it was DOA.

EVGA was excellent in a quick (less than 5 days) shipment out of a new MB that performed flawlessly.
I eventually traded up for a Classified, have had it for just about a year now with not a single problem.

Anybody can have a bad board, honestly I'm surprised by the LACK of failures given the complexities and shipping, etc.

Hope your new one is better.
 
Hey jtsnow219,

I'm going through the exact same thing you are, but with the eVGA X58 LE board. I too have a Classified board running 3 DIMM's flawlessly but when I tried out the new board I got the same thing. I tried resetting the CPU and it's the same outcome, now in a different slot. If I occupy Slot 2 and Slot 3 (gray) it boots but only shows 2GB memory. It seems it won't accept anything more. I tried just occupying the Slot 2 (gray) and it wouldn't boot. It would cycle between 00 - E8 - 69 post codes over and over. When I put 2 memory modules in, it would boot, but only show 2GB total system memory. It seems it won't recognize more then 1 DIMM and it won't boot up when 3 modules are installed and it stalls at post code 68.

I have that Advanced RMA process as well. I'm going to rule out the CPU today and swap the CPU into the classified. (both are i7 920's)... But I have a feeling it's a bad DIMM controller like what they said in the answered email. I'll update ya guys on my experience. So far I'm pleased with the quick responses from eVGA's support, bad boards do happened and i'm 100% satisfied so far through this process about their response times...

Update #1: It's not the CPU... Swapped the CPU into the classified and it's working just fine (recognizing the 3 DIMM's) ... So it does look like it's a bad X58 LE motherboard...
 
Last edited:
Back
Top