EVGA 680i is not posting

Viperlover

Gawd
Joined
Jun 7, 2006
Messages
631
Today we put my friends computer into a new case and a 9600gt into it. We tried to boot it up and it would just give a quick flash of the fans and die.

We took it out, and got it to boot outside of the case, put it back in, and all is good for the 5 minutes we are uninstalling old 8600gt drivers in safe mode.

We shut it off, turn it back on and it does not post. we just get the blank "--" error, which i guess means no post. Everything turns on except the CPU cooler, and it just sits there with "--" on its digital poster thing.

Things we have tried: Clearing the bios ( we tried moving the jumper pins back and forth, removing the cmos battery, and all of that with it unplugged)

Where do we go from here? Take it back out of the case and see if it will post?
 
Smash it with a hammer and huck it in the garbage.

:rolleyes:

Sorry thats not helpful I know.As an ex-680i owner I'm just jaded.

Do you have components you can use to 'switch out' and test with ?

The first thing I would try , would be to put in some pc-6400 ddr2 or lower , that runs at 1.85 volts , and see if that works.680i's are very , very picky about ram.

Failing that, it could be corrupt bios , or update required , but unpostable bios.......(my striker did that twice)....RMA time...

good luck man .
 
:)



Make sure you don't have a stand-off sticking up and poking the back side of the motherboard where it's not supposed to be.
 
Smash it with a hammer and huck it in the garbage.

:rolleyes:

Sorry thats not helpful I know.As an ex-680i owner I'm just jaded.

Do you have components you can use to 'switch out' and test with ?

The first thing I would try , would be to put in some pc-6400 ddr2 or lower , that runs at 1.85 volts , and see if that works.680i's are very , very picky about ram.

Failing that, it could be corrupt bios , or update required , but unpostable bios.......(my striker did that twice)....RMA time...

good luck man .
The ram that he is using is actually ddr2-667 and it runs at 1.8 volts, and it worked before, i wouldnt see why not now

maybe the bios was corrupted somehow when we cleared it?

Have you tried a different power supply?
no, we only have 1 that we could use, and it worked all the time previously



:)



Make sure you don't have a stand-off sticking up and poking the back side of the motherboard where it's not supposed to be.
we are sure that we don't, all standoffs are in the right position, we are just missing one at the bottom in the middle
 
Yea I'd look at bios....It could certainly be PSU related as well.

The bios seems really iffy on these boards.....were you running the latest version or out of the box ?
 
Yea I'd look at bios....It could certainly be PSU related as well.

The bios seems really iffy on these boards.....were you running the latest version or out of the box ?
it was more than likely the one that came straight out of the box.

What is weird to me though is just how it didnt want to work in the case at first, and then it did after we took it out and put it back in, and now it suddenly doesnt even post.
 
Id try and get a hold of another PSU of equal or greater wattage/amps and test it using that.
 
Back
Top