eVGA 6800 ultra boot crisis

krazykrook

n00b
Joined
Jan 8, 2005
Messages
15
I got this card last week and I havent been able to boot up into windows with the nvidia driver installed. Its ticking me off, I had an ati video card in before. Then I uninstalled ati driver and put the 6800 ultra in. It boots up into windows, then i install the driver for it, then i restart. Windows loading screen will show up like it always does except, instead of going to login screen, it just goes blank. The hard drive activity light is flashing like its loading xp up but there is no screen. It doesnt go back to post, just stays there. Does this every time. Turned fast write off and changed agp to 4x and still doesnt work. Ive put the 9800pro back in and uninstalled nvidia display driver and tried this process many of times and still wont get into the login screen. I have set my cpu settings back to default and that doesnt work either. Ive installed the latest nforce drivers and same result. So, basically I can get into windows without nvidia display driver installed but I cant when they are installed.

My specs
abit nf7-s v2
amd barton 2500
2x512mb corsair xms 3200 6-3-3-2
eVGA 6800 ultra and saphire 9800pro 128mb
antec true 380w
Lite On LTR-52327S
NEC ND-3500A
120g SATA wd
160g SATA seagate

I just cant seem to figure this out. Any help would be great.
thanks
 
I was having a similar problem yesterday upgrading my in-laws computer. Turned out they had all sorts of old driver files laying around. Make sure to use Driver Cleaner, although that didn't do the trick for me. I also had to do a search files containing the string "NVidia" and consequently removed a bunch of nv*.dll files from the Windows directory and system32 directory.

Monty
 
did you run driver cleaner 3?.. well.. boot into safe mode... run driver cleaner 3.. and it should work and proceed to instal the driivers again
 
Ive had similar problems with a 9700 Pro and an Asus A8V mobo. It went to a black screen after boot right after first Windows screen and the activity light kept going and the monitor kept its signal, but had no image.

I dont know what causes this.
 
CMOS reset and a Clean OS install with slipsteam Service Pack install CD. I had this problem from a 9800 XT to a 6800 Ultra.
 
Yea I have to agree, get yuourself a little better PSU. 380W is barely cutting it with such a graphics card.
 
Well, I reinstalled xp and that seemed to have solved the problem. I will look into a new psu in the near future but, my current one seems to be getting the job done so far. Thanks for your time
 
Back
Top