Error code help with Abit NF7-S

Zyzzyva100

[H]ard|Gawd
Joined
Feb 26, 2001
Messages
1,204
The computer that I recently built for my girlfriend has been working perfectly, until today when she went to turn it on, and only got an alarm like beeping.

It seemed like it was trying to post, but there was never any video signal. Then it just started with this extremely obnoxious alarm like sound.

I tried resetting the CMOS, and the alarm like noise went away, but now Im not getting any post beep, nor any video signal. Processor is a mobile 2400, its slightly overclocked, but at the default voltage. It has a good thermalright hsf on there, and its still ok. Video card is a radeon 9200, but its passive, so theres no way to see if its powering on.

I also tried taking out the ram, and it did the normal beeps for having no ram, so its still somewhat responsive. I have a few ideas for later, but its finals week and Im just wondering if anybody knows what that alarm sounding beep is, there was no mention of it in the manual.

I know there are lots of people here using NF7's w/ mobile processors, so I would really appreciate any insight here.
 
Reset your CMOS, see what happens. I have the exact same setup. It's a sign of too high an overclock for me.
 
I tried resetting the CMOS, that just made it so that I got nothing at all. As far as the overclock, its a 1.8 Ghz chip, that I had running at 2 Ghz (just so I could get the memory to run at ddr400), and especially since this is one of the 35 watt mobile chips, it could have gone alot farther.

But that doesn't seem to be the problem, I managed to dig up on the abit forums that the two tone alarm is either a sign of bad voltage or overheating. Well, its a new 400 watt ulta psu (not top of the line, but more than enough to run what little was in this box), and the thermalright al/cu whateveritscalled was seated fine. The weird thing is that the machine was turned off at night working fine, and then just did this in the morning.

I had a spare athlon xp machine sitting around, so I tried swapping processors, ram, and even hooked up a different psu to this machine, still no post. I plan to test the video card tomorrow, but seeing as I don't even get a post beep now, Im pretty sure this motherboard is just toast. It seems to have suffered from sudden motherboard death syndrome.
 
Back
Top