Epox or Soltek?

morfinx

[H]ard|Gawd
Joined
Feb 18, 2005
Messages
1,105
Which board would be better? Soltek SL-K8TPro-939 or Epox EP-9NDA3J?
 
i have the epox 3+.same except for a couple built in features.. nice board. vcore to +.35 on newer revisions. vdimm only 2.8v so you will need tccd to overclock. early versions have ethernet problems. i went from a s754 3000+newcastle @ 2700mhz to a s939 3500+ 90nm winchester @2700mhz and did not show a great deal of improvement. so if you're upgrading from socket 754 you might want to consider that.


very truly yours,
politenessman
 
i would go with soltek over epox, solely based on the lack of vdimm options...
 
chile7236 said:
i would go with soltek over epox, solely based on the lack of vdimm options...

Oi, the opinions are split. Anyone else?
 
morfinx said:
Which board would be better? Soltek SL-K8TPro-939 or Epox EP-9NDA3J?
Before you buy either of them, you might wanna find out what brand capacitors they use. I just had an Epox AND a Soltek die due to bulging and leaking caps. :mad:
No more Epox and no more Soltek for me...
 
Thanks for the tips guys. I'm going to go with Soltek. One of the main reason is that on Anandtech's Forum, there's a Soltek rep (Lydia) that keeps in touch with everyone and answer their questions and take their inputs. And those inputs help shape the BIOS revisions. By reading the almost 600 posts thread, I see the transformation of the various BIOS revisions that fixed problems that people reported. Dont get me wrong, in my K6-2 days I had an Epox MVP3 board and never had a problem, but I will give my business to a company that stands behind their product and stays in touch with their consumers. That's what sold me on Soltek.
 
Oh god, dont get soltek, please dont oh lordy. I'm having such horrible voltage problems with mine and it doesnt report temps worth a damn. Get a DFI.

Their tech support is friendly at Soltek, but my experience has been pure crap with their motherboard.
 
Get an Asus or an Abit or something. I personally avoid lower tier manufacturers. It generally works out better that way.

When cutting costs in your rig the motherboard isn't a good place to do it.
 
Epox is by far not a lower tier MFG...they jsut dont seem to be in the runnign for top overclock baord, and dont seem to want to be. But they have allway made great boards, From what iv gathered there nf3 boars have had less problems over all other nf3 boards out.. I have one now, but only because i killed my NEO2 and needed a cheap replacement. This baord is running great ( EP-9NDA3J) ruynnig my CPU @ 2.6Ghz...i droped the multiiplyer to 8 and got it to post a 290HTT....so the overclcocking isnt too shabby..

and abit? yawn! im sorry but they just havent made a good a64 setup yet...aside from the NF4 board that jsut came out, but that still hasnt been determend to be better that any others yet. and dont even get me started on the crap ASUS has been putting out....again aside fomr there first to be SLI board... caugh.still buggy..caugh...

I say out of those 2 go epox...the baord is running great for me. specs in sig. (man i loved my old 8rda+) expecially if you lookign for something to hold you off untill Nf4 and PCI-X the price is right on the epox for a short time board..and even better if your going to keep it and get good use out of it.
 
robberbaron said:
Oh god, dont get soltek, please dont oh lordy. I'm having such horrible voltage problems with mine and it doesnt report temps worth a damn. Get a DFI.

Their tech support is friendly at Soltek, but my experience has been pure crap with their motherboard.

i totally agree with this...

only problem is hes looking for s939 NF3 AGP, and DFI has yet to release a s939 AGP board.

but its true DFI ownz all.... they seriously made abit look like ECS in overclcoking... lol
 
Well I would have gotten a DFI if they made a 939 mobo with AGP support. As for Soltek, a large # of people on Anandtech seem to be be happy with it. Yes there are a few nagging problems, but I'm sure that's true with any board. The latest BIOS update should have fixed the errorenous CPU temp report on the Soltek. Robberbaron I see you have the NF3 version, I'm talking about the the VIA KT8-800Pro version.
 
morfinx said:
Well I would have gotten a DFI if they made a 939 mobo with AGP support. As for Soltek, a large # of people on Anandtech seem to be be happy with it. Yes there are a few nagging problems, but I'm sure that's true with any board. The latest BIOS update should have fixed the errorenous CPU temp report on the Soltek. Robberbaron I see you have the NF3 version, I'm talking about the the VIA KT8-800Pro version.


Yes but this board attempted to murder my 3700+ when I put it in. It overvolted a little with the 2800+, but it damn near killed the 3700+ by overvolting about .125V. I haven't heard of any DFI's doing that.

IT TRIED TO KILL MAH BABY!

edit: why on earth do you want the VIA chipset?
 
robberbaron said:
edit: why on earth do you want the VIA chipset?

Cuz the NF3 chipset tried to kill your baby? :) Actually from the benchmarks I've seen, performances and features seemed to be comparable b/w NF3 and KT8, or at least the Soltek board running KT8 chipset. I also read on the giant thread on Anandtech that many people with the same board (KT8) achieved good OC results. So I figured why not.
 
morfinx said:
Cuz the NF3 chipset tried to kill your baby? :) Actually from the benchmarks I've seen, performances and features seemed to be comparable b/w NF3 and KT8. I also read on the giant thread on Anandtech that many people with the same board (KT8) achieved good OC results. So I figured why not.

Alrighty. I just know that the non pro VIA one is kinda garbagey.

It's unfortunate that DFI is taking their damn time making an nForce3 ultra board. The MSI K8N Neo2 plat is supposed to be THE standard overclocker for AGP 939. Maybe look into that?

Another reason I advise against it is that Soltek uses cheapass components. I cant get 250MHz HTT no matter what HTT multiplier and no matter what high end RAM I use. Soltek just puts garbage on their motherboards and paints them purple and black.
 
robberbaron said:
Alrighty. I just know that the non pro VIA one is kinda garbagey.

It's unfortunate that DFI is taking their damn time making an nForce3 ultra board. The MSI K8N Neo2 plat is supposed to be THE standard overclocker for AGP 939. Maybe look into that?

Another reason I advise against it is that Soltek uses cheapass components. I cant get 250MHz HTT no matter what HTT multiplier and no matter what high end RAM I use. Soltek just puts garbage on their motherboards and paints them purple and black.

*mesmerized* ooooooh puuuuuurpllllllleeeee... lol the MSI board is out of stock on newegg. Another factor is that the Soltek KT8-800Pro board has a 5/5 star rating on newegg, not many boards has that good of a rating, the MSI has 4/5 stars.
 
morfinx said:
*mesmerized* ooooooh puuuuuurpllllllleeeee... lol the MSI board is out of stock on newegg. Another factor is that the Soltek KT8-800Pro board has a 5/5 star rating on newegg, not many boards has that good of a rating, the MSI has 4/5 stars.

Well, the price cant be beaten, and the lack of MSI goodness is disappointing. Well, I'm really reluctant to reccomend a Soltek, and I'm sure by now I've made that clear. But, if they have learned from their mistakes, then go for it. Just know I warned you!
 
via sucks, allways have allways will...

Hey what the deal with onboard sound by creative? what board is that?
 
I have the 9NDA3+ -

1. undervolts like crazy - 1.34 at default with 3000+
2. Not stable at default - it will radmonly not boot into windows and/or post that my drive positions have changed and I need to correc it in the bios.
3. Not stable at all really - I have been back and fourth with Epox on this - they told me to set it too full default - did it same issues. Up the voltage - same issues no matter what I set it at (and no mention of the fact it undervolts -.06 volts).

I went back and fourth with them and there final suggestion was to buy one of the 4 (yes FOUR) recommended memory for the system. Two corsair brands, one OCZ and one I never heard of. (Apparently my Kingston HyperX DDR500 that worked in two other asus boards and one gigabyte board was the culprit....*sigh*)
 
9NDA3+ owner here...

No problems for me. Running a 3200+ at 2.4GHz. Never crashed once. I'm using Mushkin PC3200 BH-5 RAM at tight timings, CAS 2-2-2-6 1T.

I put together a similar system for my brother. Got his 3200+ running at 2.4GHz also with no issues. He's very happy with it. It's running Corsair PC3200.
 
groebuck said:
I have the 9NDA3+ -

1. undervolts like crazy - 1.34 at default with 3000+
2. Not stable at default - it will radmonly not boot into windows and/or post that my drive positions have changed and I need to correc it in the bios.
3. Not stable at all really - I have been back and fourth with Epox on this - they told me to set it too full default - did it same issues. Up the voltage - same issues no matter what I set it at (and no mention of the fact it undervolts -.06 volts).

I went back and fourth with them and there final suggestion was to buy one of the 4 (yes FOUR) recommended memory for the system. Two corsair brands, one OCZ and one I never heard of. (Apparently my Kingston HyperX DDR500 that worked in two other asus boards and one gigabyte board was the culprit....*sigh*)


Most Nf3 board undervolt the 90nm CPUs...thats life now adays. It did undervolt my 3500 90nm, but overvolts my 3800+ 130nm...by about .02v....lucky thing is you dont need volts on a 90nm CPU :)

The board will default good memory to 1t, but 1t is not stabel in slots 1&2, so try your memory in slots 3&4. Also yes, your right, memory is a bitch, as with most a64 baords...

every mfg has there bad board..sucks when you get one.
 
well I just ordered a winnie 3000, the soltek board and a gig of mushin tccd. I'll let you guys know how everything turns out.

Is the stock HSF ok for OC or do I need to upgrade?
 
Back
Top