Hi All,
I hope someone can help with this problem.
I was recently roped in to build a PC for a local golf club, however there have been 'complications'.
The EPoX EP-8KMM3i mobo I bought does not seem to like modems at all.
The exact problem that happens is
- I install the modem
- Windows detects it and it seems to install fine
- When I attempt to dial a connection the modem
complains about no dialtone or sometimes hangs the
whole PC.
I tried switching to a different
PCI slot but got the exact same problem.
I then thought that maybe it was the motherboard that
was faulty so I tried a different modem from another
computer and again I had the same problem. So
obviously the modem is not the problem, could it be
the motherboard??
I also tried both Windows 98 SE and Windows ME with
the same results.
I have upgraded to the latest drivers, the VIA 4in1
drivers for the motherboard.
One thing I did find out is that the hanging appeared to be an IRQ problem, a lot of the IRQs on the mobo are shared with onboard USB, sound, VGA, when I disabled the USB it got rid of the hanging problem(for certain PCI slots) but not the 'no dialtone' which is driving me crazy
Any suggestions would be most welcome or else I have a
faulty motherboard???
Thanks in advance
Kieran
I hope someone can help with this problem.
I was recently roped in to build a PC for a local golf club, however there have been 'complications'.
The EPoX EP-8KMM3i mobo I bought does not seem to like modems at all.
The exact problem that happens is
- I install the modem
- Windows detects it and it seems to install fine
- When I attempt to dial a connection the modem
complains about no dialtone or sometimes hangs the
whole PC.
I tried switching to a different
PCI slot but got the exact same problem.
I then thought that maybe it was the motherboard that
was faulty so I tried a different modem from another
computer and again I had the same problem. So
obviously the modem is not the problem, could it be
the motherboard??
I also tried both Windows 98 SE and Windows ME with
the same results.
I have upgraded to the latest drivers, the VIA 4in1
drivers for the motherboard.
One thing I did find out is that the hanging appeared to be an IRQ problem, a lot of the IRQs on the mobo are shared with onboard USB, sound, VGA, when I disabled the USB it got rid of the hanging problem(for certain PCI slots) but not the 'no dialtone' which is driving me crazy
Any suggestions would be most welcome or else I have a
faulty motherboard???
Thanks in advance
Kieran