Epox 8kha+ max cpu speed

fshanda

n00b
Joined
Jul 22, 2004
Messages
2
I want to know if anyone is runing an XP2600 barton mobile processor on their 8kha+ without any problems. I have read in a few places about troubles with using the regular XP2600 because of the larger voltage requirements of the processor. Some people had good luck and some had none, even with the latest bios update.

Im thinking about the mobile core because hopefuly the lower voltage requirement wont give me the troubles I have read about . The larger L2/ 512KB cache is a plus on the chip too.

If your running the regular XP2600 thoroughbred core on the 8kha+ I wouldnt mind hearing about your experiences with it.
 
Better find out if the bartons are compatible with the 8kha first. I'm getting the sneaking suspicion that they aren't but best check for yourself first...
 
for the mobile 45W 2600 XP processor, the voltage requirement is 1.45 volts
The Epox board is set to give anywhere from 1.5 to 1.85 volts (adjustable via bios)
Aside from the processor requiring only 1.45 volts to operate normally, it will do fine and even overclock on anything up to 1.8 volts (and probably higher but since I get my 45W 2600Mobile on Wednesday I haven't been able to test its limits.)
There could be some problems as was suggested with the barton core since the 8KHA+ is a KT266a chipset and was as I recall only able to operate on the Palomino, TbredA/B cores. In fact, I just checked on that at the FTP://FTP.epox.com site under manual thers a CPU Compatability list for all epox motherboards. It displays the Barton cores with 333FSB as incompatable (which may only be due to the 333mhz FSB, but probably also has something to do with the different core the barton provided. There are quite a few bios's on the epox FTP site you might look into including beta bioses which may allow it to work, but you'll have to look into that yourself since I no longer own any 8KHA+ boards.
Good Luck
 
I was looking at NewEgg at the mobile barton chip because it has a 266mHz fsb, so I thought I would be safe and in spec if I chose that paticular processor. Thanks for the info .

Yea I also browsed the Epox site and got the recomended chip PDF for the board. It does show the XP2600 but makes no mention of the mobile barton core with the 266mHz fsb. Just shows the bartons with the 333 mHz fsb and of course im out of luck with those.
 
Back
Top