• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Enermax Liberty cable length...

L

LoneWolf

2[H]4U
Joined
Jul 13, 2004
Messages
3,190
Hi all...

If anyone owns an Enermax Liberty PSU here, I'd appreciate knowing the length of the modular and ATX cables.

My issues are described here. Basically, I'm down to two power supplies: The Enermax Liberty 400w or the Antec NeoHE 500w (I'd go lower with Antec, but you have to choose the 500 or 550w NeoHE to get the 8-pin EPS power connector used by the Intel BadAxe mainboard). I need to make sure cables will be long enough to reach where they need to in the Antec P180 case. The Enermax PSU is a good fit for what I want to do, and 20 bucks less (plus it's 3.3v/5v rails are rated a little better). However, I've already heard that the Antec unit will stretch as far as I need it to as cable-length goes.

Silly question, I know, but important. I don't want to have to send a component back. As usual, thanks for any help you guys can provide.
 
I can measure the length of one of the modular cables for you when I get back from work, if nobody else has replied by then. I have the 500W Liberty.
 
The Enermax Liberty works very well in the P180 case, from what I hear.
 
Thanks, dB. MJC, I appreciate any information you can give me as well. I think the entire Liberty line should have the same length cables, so that should be good.
 
You must log in or register to reply here.
Back
Top