• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Enermax EG565P-VE

K

koomba

Limp Gawd
Joined
Nov 10, 2004
Messages
297
I've been reading up trying to decide on a sufficient SLI system that I'm building, and I've read alot about the enermax 600w SLI power supply. I was looking through Enermax PS and ran across the EG565P-VE, which seems identical except for the fact that its 535 watt, instead of 600w. Now my question is, should this till be ok to handle dual 6800gts and an o/c'd a64?

And another question, I read reading the specs on these 2 power supplies, and they said that they have 24/20 pin connectors. Does this mean they have ACTUAL 24 pin connectors, or just a 20-pin with a 24-pin converter? Because I'd really like to get a PSU that has a 24 pin connector, considering thats what my new motherboard has, and I've read alot of problems with overclocking if you don't have the full 24 pins.

Thanks!
 
I got what you got.
The biggest reasons are-
1. Enermax is a good anme and have been a good PS.
2. It was on the Nvidia approved SLI PS list.
3. It was 93 dollars on sale shipped!
 
It'll handle your setup fine.

I think it has a removable 4-pin section, no need for an adapter with a 20-pin board.
 
You must log in or register to reply here.
Back
Top