• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

EMC SAN Setup: What am I missing?

3

3one5

Gawd
Joined
Jan 6, 2005
Messages
579
I picked this up a few months ago and am now getting around setting it up. I believe the model is CX3-20 but I'll have to double check that. I need help with the connections. The drive chassis has copper fiber channel connections while the storage processors have fiber connections. How does the drive chassis connect to the storage processor?

VD7gDuB.jpg


dhEjvi0.jpg
 
The SFP port in the middle next to the orange bit? The other two SFPs presumably go to your FC switches (or HBA if you don't have one).
 
Thanks guys. I went digging through my cables and found what i needed.
 
This is the cable you need SFP on one end and HSSDC2 on the other, if you need 1 or 2 i have some extras, PM me.


20130720_000841.jpg
 
vektor777 said:
This is the cable you need SFP on one end and HSSDC2 on the other, if you need 1 or 2 i have some extras, PM me.


20130720_000841.jpg
Click to expand...

I found one, I'm pretty sure the others are around. I may hit you up if that isn't the case. Thanks!
 
You must log in or register to reply here.
Back
Top