eMachines crapped out after plugging it back in.

Celestial Avenger

Limp Gawd
Joined
Jul 12, 2005
Messages
414
Basically I had two computers side by side, an eMachines Athlon XP 2800+ and a Celeron 433. I had moved the hookups over to the Celeron for a few months, but the second I plugged all the wires back into the eMachines yesterday, I now hear the power supply fan immediately after plugging it in, no power buttons even pressed yet, and see a dim light in the front of the case, but it will not start up. Usually the power button (the big E logo) glows blue, but it does not anymore.

So, I'm dumb at this. What's my problem here? A wire fell somewhere in the PC that I'm not seeing? The tard 250W PSU is toast? What?
 
What do you mean you moved the hookups? You sure something didn't shift around and cause your motherboard to become grounded to the case?
 
No no, I mean the typical wires in the back of the machine, like the keyboard and mouse, the DVI cable and the cable for the PSU. Nothing inside was moved.
 
Celestial Avenger said:
So.. this means.. what happened?

This means (drumroll..)
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Time for a new power supply!
 
Very likely it is a power supply issue. You should test it out with either a digital multimeter, or one of those power supply testers (I think like $10-15 at compusa).

If you have a working power supply, try that.
 
At this rate I should just rip the 300W PSU out of the Celeron 433 box and cram it in the other machine if that would work.
 
You could except that I seriously doubt that 300 Watt max PS will be enough to reliably power the newer machine.

You're best bet is to pull the dead one out and only replace it with one of the same power rating or higher.

A decent power supply for that shouldn't set you back more than about $50. Check newegg for something similar. Hell, I'll bet they have a 1 day sale going on something that will fix you right up.
 
Geez. What a waste, the computer isn't even worth that much. I'll just salvage the RAM, video card, and hard drive and sell the rest if I can.
 
I suppose now is a good time to mention that the computer used to shut itself off after playing San Andreas for five minutes. I totally forgot about that.
 
A 300W PSU will power an XP 2800+ (its more than enough). Pull the PSU out of the celeron box and jus connect the motherboard and hard drive to the "new" psu and power it up. If nothing happens, then its not your PSU, but rather something else... your ram, cpu, or mobo.
 
Back
Top