• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

El Wire "switch making"

U

UT-Jackal

Limp Gawd
Joined
Apr 2, 2004
Messages
373
Sorry about the title i dont know how else to put it.
I bought a rocker switch for my el wire but i dont know if i can use it or not. I have them on my cathoids but i hooked up the yellow and the red wires on them. The El wire only has Black and Red. What can i do?

- Jackal -
 
should i just cut the red wire at a certain spot and hook one side to one part of the rocker and the other to the other part?
 
Yup, it's that simple :)

Just figure out where you are going to mount the switch (if you are going to mount it) and find the best spot along the wire to make the cut.

EDIT: Just to verify, the red and black wires you are talking about are coming from the PSU, and not from the inverter, right? Don't know if it makes any difference. Someone feel free to reply if it matters.
 
well the wires go from the molex connector to the psu to the inverter to the el wire, and its the part taht coneects the inverter to the psu. but it did come with the el wire so its not like a direct strand from the psu, i dont know if that matter or not. And is it possible to lengthen this wire for the switch, it is some what short.
 
You must log in or register to reply here.
Back
Top