So I have my newly traded for rig in my newly painted (interior anyway) Haf 912. I also have 2x 200mm fans on the way (both black with no LED's). Well I am using an MSI 890Gxm motherboard which doesnt give me shit for extra fan control as its only got 1 extra onboard controller. Well I have been eyeballing the SILVERSTONE FP33-B from newegg for 29 bucks shipped because I would prefer the controller end up in the Extra oddball PCI slot (or one of the lower PCI slots since I have a few extra below the motherboard).
Anyhow I Figured that was alot to spend So I checked ebay to see if I could find one cheaper & I found this guy.. For 7 bucks shipped I pretty much ordered on the spot. Well I was wondering if anyone has used these cheapo china fan controllers with any luck be it good or bad.
I will probably end up using it just to drive the 2x 200mm fans as I will most likely remove the extra 120 from the back (the 200mm above it should remove plenty of air). And use the extra fan controller on the motherboard to add a pull fan to my Hyper 212+ (has a gently typhoon pushing right now & its bloody hell loud which isnt cool)
Anyhow I Figured that was alot to spend So I checked ebay to see if I could find one cheaper & I found this guy.. For 7 bucks shipped I pretty much ordered on the spot. Well I was wondering if anyone has used these cheapo china fan controllers with any luck be it good or bad.
I will probably end up using it just to drive the 2x 200mm fans as I will most likely remove the extra 120 from the back (the 200mm above it should remove plenty of air). And use the extra fan controller on the motherboard to add a pull fan to my Hyper 212+ (has a gently typhoon pushing right now & its bloody hell loud which isnt cool)
As an eBay Associate, HardForum may earn from qualifying purchases.