Editing BIOS - Flashing new clock speeds

Flapjack

2[H]4U
2FA
Joined
Apr 29, 2000
Messages
3,217
Hey everyone. I have a 128MB, ATI-branded 9800 Pro which has a 360 core in it. I flashed it to an XT with very little problem. I think I was using the Powercolor BIOS, since they were the only ones to release a 128MB XT, if I remember right. The problem is, it's been so long, I don't remember the procedure.

The problem I'm having is the card runs great for an hour or so. After that, I start getting artifacts in 3D games. If I move the memory speed down from 357 to 351, all my problems go away.

I want to make a backup of the current firmware, edit it to the new 351 memory speed, and reflash it.

Can anyone help me out??
 
i think the problem is, that even tho its the same core, the XTs came with a better cooler then a normal 9800pro did
 
That's not the problem. I have a nice heatpiped, aftermarket cooler on it.

The memory is the problem. They're rated at 2.8ns, which should be good for 357mhz, but they're not. :p

I just need to back up the BIOS, edit the mem speed down to 351, and reflash.
 
Go to www.mvktech.net and they have every bios, utility, and custom driver ever written pretty much. If you just need to back up your current bios and edit it with specific values then this site can help you with that. Enjoy and good luck ;)
 
Thanks for the reply. Actually, someone on the 2CPU forums really hooked me up. Gave me a direct link to Flashrom, ATI Tray Tools, and RaBit. I was able to do a dump of the current BIOS with ATI Tray Tools, edit the clock speeds in the BIOS with RaBit, then flash it with Flashrom. Everything went well.

I'll bookmark the other site, though. Looks good.
 
Sorry i came late, i did the exactly same thing with my 9800Pro, took the XT bios and edited the mem speed down to 351 then reflashed, works like a champ.
 
Back
Top