• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

edited:Water Cooling FirstTime Input needed :D

C

coolkishan

Limp Gawd
Joined
Aug 5, 2005
Messages
320
ThermoChill 3/8" BSP 1/2" Barb – Nickel ( x2 ) ( For the rad is this right? )
ThermoChill PA120.3
DD12V-D5 Pump Variable Speed
D-TEK FuZion CPU Block
Danger Den Dual 5 1/4" Bay Reservoir
Tygon 3603 Tubing 1/2" ID 3/4" OD
FluidXP Extreme
Hose clips for securing tubes on barbs
What case would all of that fit in ? I was thinking of the Lian Li PCV2100 Plus but someone said that it wouldnt fit?

Is that watercooling setup ok? What have a missed out if anything ?

Thanks in advance
 
Well, I'm cramming a similar setup into a PC-V1000B, so you can fit it into the 2100 with a bit of planning ;)

also, forget the FluidXP. I've heard way too many horror stories (and some about it not even protecting a GPU when there was a leak, smoke was released ;) ) about it. Get distilled water + pentosin.

Not sure about the barbs though, i've never used a PA radiator :eek:

Masterkleer tubing is 7/16" ID rather than 1/2" ID. Therefore, it's harder to get on and of the block barbs... Makes for a lower leak chance.

Bay resses are hard to fill up, but a double one is considerably more easy that a single one. You'll have to remove all the drives above the res if you wanna fill it.
 
Arcygenical said:
Well, I'm cramming a similar setup into a PC-V1000B, so you can fit it into the 2100 with a bit of planning ;)

also, forget the FluidXP. I've heard way too many horror stories (and some about it not even protecting a GPU when there was a leak, smoke was released ;) ) about it. Get distilled water + pentosin.

Not sure about the barbs though, i've never used a PA radiator :eek:

Masterkleer tubing is 7/16" ID rather than 1/2" ID. Therefore, it's harder to get on and of the block barbs... Makes for a lower leak chance.

Bay resses are hard to fill up, but a double one is considerably more easy that a single one. You'll have to remove all the drives above the res if you wanna fill it.
Click to expand...

Thanks but i cant get the masterkleer tubing as the website i am ordering from doesnt have it ( UK site cant order from danger den etc. ) So ill have to stick with the Tygon but yeah thanks for the heads up about the FluidXP ill take ure advice on that.

Thats the problem im having. The radiator. Ive bin told it wouldnt fit and the barb problem.. anyone else know ??

Also i am using high flow barbs in everything apart from the barbs on the rad would this make anything wrong??

Thanks
 
You must log in or register to reply here.
Back
Top