ECS K7S5A Pro question....

QwertyJuan

[H]F Junkie
Joined
Aug 17, 2000
Messages
11,285
Gotta question.... I have this board and am using the Cheepobios hacked bios from the Internet.... it makes the board allow 166 and 200MHz FSb.... still no voltage adjustments but the FSB nonetheless.... gotta question before I jump in with both feet and fry a processor :D

If I put a 2500+ Barton on this board would it work or would I kill it?? I keep looking at it and wondering... I am building 40 machines in a bit ALL with 2500+ processors and I want to try it just for fun :D

Any suggestions??

QwertyJuan
 
lotsa good info on that board at ocworkbench forum.

You will prolly need to do the VCore mod, its wicked easy, details at that site.

Dont count on anything higer than 147Mhz FSB. PCI/AGP not locked really, so 147 gets nice but not TOO high overclock on PCI bus too. The PLL wont allow booting from 166Mhz, or reliable operation even with windows FSB tweaker.

Also, no multiplier adjustments, you'll need to do it the old fashioned way.... solder jumpers on the underside of board on cpu socket pins.... set whatever multi you want... 147x??

You'll want HoneyX's bios, Ive used it on a bunch, real nice.
 
Over at amdmb.com a couple people have gotten the bartons to work @ 166 but i think they are booting at 133 and then overclocking to 166 manually in windows.
 
Yes using speedfan, etc people are booting to windows at 133-150 and then upping the FSB to 166. But I never bothered, 147 was fine and completely stable. I had a 2500+XP barton that booted fine, but that was long after I had the HoneyX bios and VCore mod installed. TBredB's work fine as can be.
 
Back
Top