EasyTune5 weirdness

U

Urian

n00b
Joined
Jul 31, 2006
Messages
16
Hi! I finished putting together my computer some 5-6 hours ago and this is the first time I've been using EasyTune for monitoring. When checking out the various aspects of it I noticed a small flashing triangle with an exclamation mark in it next to the indicator for my CPU fan (rpm at about 250). Should I worry? I'm using a Tuniq Tower for cooling a C2D E6600 (not OC'd yet) and the temps are 41 for system temp and 28 for CPU.

Since IMO those temps are fine, does anyone know why the warning triangle is flashing?
 
in your settings, you define what the normal operating range (or at least min speed) is for each fan. it's giving you the triangle because the rpm is under threshold. set it to the right numbers or just ignore it.
 
EasyTune is a gigabyte software. I have a gigabyte motherboard and it made my cpu fan operate at less than 50% of its potential. It was ridiculous. Go into BIOS and disable whatever is monitoring your fan speed, so that it runs as fast as it can. My fan was running at 700 rpms then jumped to 2700 after that and it dropped my temps more than seven degrees!
 
You must log in or register to reply here.
Back
Top