easy mem question (but Im a newb)

Dulak

Limp Gawd
Joined
Oct 12, 2005
Messages
316
I have q6600, p35mb, and
2 corsair 2gb xms2 (6400) 240pin dimms ( 5 5 5 18). 4 gigs total

If I come across some cheap ram Id like to upgrade in my other 2 sockets do they need to be:

1. 4 gigs again or could I get 2 1gigs
2. Corsair again or a different brand
3. Speed ... so these are 6400 is it important for me to get more at 6400 or could I get some at a lower speed or even higher? ...

Prob ask me about ocing - I recently oced my system to 2800~ on air; only changed the bus nothing else.

thanks
 
I have q6600, p35mb, and
2 corsair 2gb xms2 (6400) 240pin dimms ( 5 5 5 18). 4 gigs total

If I come across some cheap ram Id like to upgrade in my other 2 sockets do they need to be:

1. 4 gigs again or could I get 2 1gigs
2. Corsair again or a different brand
3. Speed ... so these are 6400 is it important for me to get more at 6400 or could I get some at a lower speed or even higher? ...

Prob ask me about ocing - I recently oced my system to 2800~ on air; only changed the bus nothing else.

thanks

Hi, Dulak,

Answers:

1. It depends on your OS. If you are running a 32-bit OS the maximum memory is 4GB. If you have a 64-bit OS then you can run more than 4GB.

2. You can "mix" brands.

3. You can get ram of the same, higher, or lower speed, but you will be limited to the lowest stable speed. So lower speed ram might limit the your current ram you if that lower speed ram is not stable at the higher clocking.

I'm sure others will wander by with any needed corrections, additiona, suggestions, etc. ... :D

Hope this helps.

Chuklr
 
Just make sure you buy DDR2 memory. Most memory out there these days are DDR3.
Do not only match the pin counts. (DDR2 and DDR3 DIMM are all 240pin)
 
Back
Top