Easiest overclock settings for a dummy (DS3/E6300)

D

discounteggroll

n00b
Joined
Dec 14, 2006
Messages
3
ok, lets just say im not the most overclock-inclined individual. what would be the most efficient/effective overclock settings that wont fry my system? ive got:

gigabyte GA-965P DS3 board
2gb g-skil DDR2 800 (PC6400) ram
Intel C2D 6300
arctic freezer 7
antec smartpower 500W PSU
ATI Radeon X1900XT


basically, what settings would I be happy wth gaming wise (bios settings), and what bios should I be running on this board?
 
With that memory, you could change the FSB to 400 and not even OC the memory. You shouldn't require any extra voltage on anything either. This would be the best performance increase you'll see for the least amount of effort. You'll want to check your temps though under load just to be sure they aren't too high.

If you'd like to know more, this thread helps alot for the DS3.
DS3 FAQ
 
skindogg said:
With that memory, you could change the FSB to 400 and not even OC the memory. You shouldn't require any extra voltage on anything either. This would be the best performance increase you'll see for the least amount of effort. You'll want to check your temps though under load just to be sure they aren't too high.

If you'd like to know more, this thread helps alot for the DS3.
DS3 FAQ
Click to expand...

Any idea where I can get this sort of information for an evga 680i :p ? Seriously, im in the same boat as the OP :(
 
You must log in or register to reply here.
Back
Top