E6400 and E6600, best bang for the buck

Damuman

Limp Gawd
Joined
Dec 1, 2006
Messages
230
Well, I think everyone who'se done any research has come to the conclusion that the e6400 and e6600 are the best bang for the buck.

However, given the choice between an e6400 retail for 220 and an e6600 oem for 270 which would you do? Taking into account also the difference in overclock ability between the two.

I'm going to be taking the stock heatsink and fan off the retail anyway for a tuniq tower, so oem is fine. I guess the real issue is, would you trust an OEM from a website other then newegg?

http://www.microcenter.com/byos/byos_single_product_results.phtml?product_id=253108

Reseller ratings say that this website isn't a scam, but it's no newegg either. Would you trust it?

Also I can get both retail for about 30$ above newegg. 250 for the e6400 and 350 for the e6600. Is it worth the extra 30 to be able to exchange in person instead of mailing? I'm interested in hearing from people who've had to deal with rma problems and the like.
 
Newegg all the way. Unbelieveable customer service. I've had to RMA a few things with them and they never ask questions, and they are always fast as hell. They are the only retailer I use for computer parts.
 
lol microcenter is a big company man. No reason to distrust them. As for an e6400 oem for 220, that's a little pricey?? I bought my retail e6400 for 190 shipped off ebay (new in box). Fair value for retail e6400's I thought was about 220.

I think oem e6400 should be able to be had for 200-210 nowadays.

And for warranty sake, I wouldn't worry much. What's to go wrong with a cpu?? And now that they moved the pins to the motherboard, that's even moreso less of an issue with cpu's. Besides, going oem would prompt you more to "void" any warranty by lapping the IHS, since really, what warranty?? :p

And for e6400 vs e6600, what are you looking to get out of the cpu? I'd say the e6400 is way better of a deal for the most part. Hell, if I were more confident (read: knowledgeable) about new c2 revision p965 chips, I probably would have sank lower and gotten an e6300 oem for cheap when they were around.

On my ds3, I'm able to run 8x400, 7x460, and fiddling with some other settings as well. I did try 7x500 but it'd reboot when trying to load windows. Hopefully when my watercooling parts get here along with better northbridge heatsink, I'll be able to do more testing.

But with the 8x multiplier you get with the e6400, you should be able to hit 400fsb easy nowadays. Hell, I went directly from 266 to 400 and never tried any in the high 300's. Besides, there's usually a hole up there anyway that would only discourage you.

As for the e6600, you'd have a 9x multi as the max, and 400 would land you at 3.6 assuming nice cooling, an average to decent chip, some voltage.
 
Well no ziddy I was saying the e6400 is 220 retail, and the e6600 is OEM.

But, OEM is fine with me since I'm gonna be mounting a tuniq tower on them anyway, and probably tossing the stock heatsink and fan.

So 220 for a 6400 or 270 for a 6600, is 50$ worth an approximate .4 ghz difference in speed in your eyes?

Well actually lemme put it this way. 220$ for a retail e6400 from newegg that they most definitely will replace if defective?

Or 270$ for an oem 6600 from those other guys who might not be as nice as newegg... =/

Or f it all and just get a 6400 for 250$ with my discount at best buy?

As far as cooling, I think a tuniq tower should be enough to cool it while its running at 400 fsb, no? That thing is frikkin huge :D

What kind of water cooling are you getting though?
 
For anyone who hasn't done any research ;) what is the best motherboard to match these up with at this time? DDR2, pci16, etc. On board Lan and Audio is O.K.
 
Asus P5B-E or Gigabyte DS3 either is fine

The Asus has firewire if you need it.

Both boards rock for overclocking and are priced pretty decently.
 
Well I would deffo go for the E6600 with the extra L2 cache, you can always gain on the overclock but you cant gain extra L2 cache.
 
Egh, turns out that site was selling pre-engineering e6600's as OEM's anyway -.-;;;;;;;;;;;; what a scam.

Well, I ordered my e6400 from newegg and it arrived the next morning!! I'm surprised at how large the stock heatsink and fan are. No wonder people were getting ~2.9 overclocks without any mods.

My p5n32-e sli is on the way along with my antec 900 case too. This is gonna be one badass piece of conroe >=)
 
You will not be dissapointed with your choice, also it depends on what you do with your setup
 
Back
Top