e6300, twinx 667, DS3 initial testing (will update)

M

mattjbak

Gawd
Joined
May 26, 2005
Messages
958
So I bought some semi cheap 667 twinx corsair stuff today... here is my initial tests to this point... (Stock volts on cpu/motherboard, ram changed to 5-5-5-15 @ 2v) Passed half of superpi 32m, and i stopped because i want to test more.

initialtestssu7.jpg
 
Well... for now I'm holding @ 480 fsb , 4 hour sp2004 custom ram/cpu stable then stopped test. Ram: 5-5-5-15 @ 2.1v

CPU: 3318 Mhz @ stock volts.


This ram is holding me back :\
 
Try dual-Prime95. My E6300 ran dual-core ORTHOS all day at a certain speed but Dual Prime95 failed within minutes.
 
mattjbak said:
Running sp2004 in same mode as prime...
Click to expand...

Did you not read what I typed? The programs can behave differently. They shouldn't, but they can.
 
I would like to know:

What cooling method you are using.(Air or water)
What brand and model of CPU heatsink or block you are using.
What BIOS version you are using.
What the week and code of your CPU is. (L6##A###) It is located on the CPU box and on the CPU.
 
mentok1982 said:
I would like to know:

What cooling method you are using.(Air or water)
What brand and model of CPU heatsink or block you are using.
What BIOS version you are using.
What the week and code of your CPU is. (L6##A###) It is located on the CPU box and on the CPU.
Click to expand...

Yes I would like to know this too, especially the week and the bios version.
 
mentok1982 said:
I would like to know:

What cooling method you are using.(Air or water)
What brand and model of CPU heatsink or block you are using.
What BIOS version you are using.
What the week and code of your CPU is. (L6##A###) It is located on the CPU box and on the CPU.
Click to expand...


Water
AquaXtreme MP-05 SPLE
F4e , official F4c and F4 were just as good for OC
l625a705
 
You must log in or register to reply here.
Back
Top