e6300 to PII x3 710?

SniperXx

2[H]4U
2FA
Joined
Jun 7, 2001
Messages
3,478
I got a e6300@3ghz and am thinking about going AM3 motherboard,DDR3 getting a x3 710 and hoping to push it to 3.4ghz or better. Maybe in another year hoping AMD will have something quite a bit better that will still work in AM3 and upgrade just the CPU.

I'd like to go i7 but it will cost nearly twice as much and this is mostly a gaming rig. I'd wait for i5 or whatever but it looks like its still 4-6 months off.

1) What will you be doing with this PC? Gaming(mostly), little video editing, music, ect
2) What's your budget? Around $350 give or take
3) Where do you live? Don't see why it matters
4) What exact parts do you need for that budget? CPU, memory and board
5) If reusing any parts, what parts will you be reusing? Everything else
6) Will you be overclocking? Yes
7) What size monitor do you have and/or plan to have? 22"
8) When do you plan on building/buying the PC? Now
9) What features do you need in a motherboard? none other than it to have o/cing options
10) Do you already have a legit and reusable/transferable OS key/license? Yes
 
hard to answer this question without answers to the 1st sticky in this fourm :confused:
 
DDR3 doesn't add anything to Phenom 2 at this time. You are better getting an AM2+ board and DDR2.
 
DDR3 doesn't add anything to Phenom 2 at this time. You are better getting an AM2+ board and DDR2.

Well I already got DDR2. Would the o/ced PII x3 710(or 720) and a decent AM2+ be a worthy upgrade over what I got?
 
I don't think its a worthy jump unless you are looking for something fun to play with. If I were you, O/C the 6300 or get a cheap Quad. What type of board are you using with the 6300. The only reason I say you get a X3 if you want to go cheap CF setup with ATI's new 40nm R740 or current 4830's.
 
Yes...

GIGABYTE GA-MA770-UD3 or GIGABYTE GA-MA790X-UD4
Phenom 2 x3 720 BE
Xigmatech Red Scorpion

$255 or $295 from newegg before S&H

But what motherboard is in your current build? If supports Q9400, I would go that way and not AM3.
 
I got a Gigabyte 965P DS3 rev 2 so the only official Quad it can take is Q6600. It does not support 1333FSB only rev3 of this board does. The price of a Q6600 I can about get the x3 and a decent AM2+ board.
 
Yea... AM3 is the way to go.

Boards I listed in my previous


GIGABYTE GA-MA770-UD3 - Single PCIE x16 and older SB700
GIGABYTE GA-MA790X-UD4 - Crossfire and newer SB750, which is better for overclocking.
 
Well It will be a bump, but I am not sure how much of a bump. What is your current video card?
 
I got a Gigabyte 965P DS3 rev 2 so the only official Quad it can take is Q6600. It does not support 1333FSB only rev3 of this board does. The price of a Q6600 I can about get the x3 and a decent AM2+ board.

It doesn't support any of the good 45nm Core 2 CPUs. Epic Fail

Gigabyte P965 - DS3 has Wolfdale support now!

If you want a quad, a Q6600 is still a great option, used or new. If you want a higher clocking dual core, pickup an E7200/E7300/E7400 and use the beta BIOS to clock it up to 3.8-4Ghz. ;)

upgrade [to an X3] not worth it at all.

I agree.
 
I say hold off. So that board cannot support 45nm Wolfdales? the new E0's are hitting 4.0GHZ and more.
 
Motherboard > GA-965P-DS3 > CPU Support List

re adding this link because aparently my brain was working.......

with that said i'd go along the lines of an e8400 or and e8500. oddly enough it doesn't show that it will support the e7XXX series even though they are 1066 FSB.

Sadly enough yet again it looks like you'd have to gable on getting a C0 stepping they don't show that the e0 will work.
 
Go AM3 OP and don't look back. Sell off your old parts to reduce the overall cost and you won't regret it.
 
Back
Top